(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Bushings For Locating Pins - Straight, Press Fit for Easy Mounting (C-JBAM12-10)
Part Number
Configured Part Number is shown.
C-JBAM12-10
Product Overview of Bushings for Fixtures
Product Feature of Bushings for Fixtures
Feature 2: Bushing for Fixtures at low cost and stock models can be shipped on the same day.
Feature 3: Bushing for Fixtures auxiliary line can be used for reference during press-fit installation to ensure smooth bushing installation.
Feature 4: Material: bearing steel (SUJ2).
Feature 5: Bushing for Fixture F7 inner diameter, which allows for easier and faster coordination with positioning pins.
Dimensional Drawing of Bushings for Fixtures
The inner diameter tolerance of bushing is high. If a vernier caliper is used for detection, the measurement result will be too small. It is recommended to use a high-precision measuring tool (internal micrometer or plug gauge, etc.) for detection.Specifications Overview of Bushings for Fixtures
■ Material Specification Table
| Type of Bushings for Fixtures |  Material |  Surface Treatment |  Hardness |
| m7 | |||
| C-JBHM | Equivalent to SUJ2 | - | 58HRC～ |
If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating on other pages.The inner diameter tolerance of bushing is high. If an vernier caliper is used for detection, the measurement result will be too small. It is recommended to use a high-precision measuring tool (internal micrometer or plug gauge, etc.) for detection.
Example Use of Bushings for Fixtures
Design summary:
① An example of using a swing cylinder to achieve linear and rotary motion through a pneumatic drive, and moving a small substrate through a suction cup.
② In the case of a long pin, if the air vent is not provided, the pin and bushing are not easy to pull out. It is necessary to provide a air vent on the bushing side or the positioning pin side.
Intended use of Bushings for Fixtures:
The axial structure of the swing cylinder can ensure positioning accuracy while saving space through the coordination of positioning pins/shouldered bushings.
Application Industries of Bushings for Fixtures
| Lithium battery | Smart phone | Electronic & Electrical Appliances | ||
 |  |  | ||
| Semiconductor | Medical | Food | ||
 |  |  |
Related Products of Bushings for Fixtures
| Mounting position adjusting type Bushings for Fixtures Adhesive shouldered | Press-fit type convenient positioning Bushings for Fixtures Shouldered type | Mounting position adjusting type Bushings for Fixtures Adhesive straight type | ||
 |  |  | ||
| Recommended model: C-JBHG6-8 | Recommended model: C-JBHM6-8 | Recommended model: C-JBAG10-15 |
Specification Table of Bushings for Fixtures
 | Part Number ( Type· d) | - |  L | |
| C-JBAM10 | - | 15 |
■ Dimension Specification Table
| Part Number | L Selection | D | D Tolerance | Wall Thickness (N) | R | |||||||||||
| Type | d | d Tolerance | m7 | |||||||||||||
| F7 | ||||||||||||||||
| Economic Straight Type (m7) C-JBAM | 4 | +0.022 +0.010 | 5 | 6 | 8 | 8 | +0.021 +0.006 | 2 | 1 | |||||||
| 5 | 6 | 8 | 10 | 10 | 2.5 | |||||||||||
| 6 | 5 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 2 | |||||||
| 8 | +0.028 +0.013 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 12 | +0.025 +0.007 | 2 | 2 | |||
| 10 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 15 | 2.5 | |||||||
| 12 | +0.034 +0.016 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 18 | 3 | ||||||
The inner diameter tolerance of bushing is high. If a vernier caliper is used for detection, the measurement result will be too small. It is recommended to use a high-precision measuring tool (internal micrometer or plug gauge, etc.) for detection.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Basic Information
| Type | Bushing | Basic Shape | Straight | Fixing Support | Not Provided |
|---|---|---|---|---|---|
| Material | SUJ2 Equivalent | Surface Treatment | Not Provided | I.D. Shape | Circular |
Please check the type/dimensions/specifications of the part C-JBAM12-10 in the Bushings For Locating Pins - Straight, Press Fit for Easy Mounting series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Will the fixture bushing rust?
- Answer: Products without surface treatment will rust. It is recommended to regularly apply antirust oil for maintenance or choose products with surface treatment (no-electro nickel plated), which can prevent rust in normal atmospheric environments. No-electro nickel plated surface can effectively prevent rust.
- Question: What tools are suitable for measuring the inner diameter of the fixture bushing?
- Answer: If the inner diameter tolerance of the fixture bushing is within 0.02mm, common vernier calipers and other measuring tools with general accuracy are not suitable. It is recommended to use a high accuracy plug gauge or an internal micrometer for measurement.
- Question: Will the inner diameter of the fixture bushing become smaller after installation?
- Answer: It will become smaller, and p6 will shrink more than m6 and m7 after installation, so please pay attention during hole machining. For detailed change values, please refer to the precautions: change in inner diameter of the fixture bushing during press-fit.
- Question: What are the options for fixture bushing outer diameter tolerance?
- Answer: Optional tolerances for the outer diameter of fixture bushing: m6, p6, g7, m7. Basically it can meet the needs of installation and positioning under general conditions.
- Question: What positioning pins are commonly used together with fixture bushings?
- Answer: The fixture bushing is of basic shape, which is usually suitable for supporting positioning pins, checking insertion pins for fixtures, etc.
Similar Part Numbers
| Part Number |
|---|
| C-JBAM10-16 |
| C-JBAM10-20 |
| C-JBAM10-25 |
| C-JBAM12-12 |
| C-JBAM12-15 |
| C-JBAM12-16 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Inner Diameter (mm) | Outer Diameter (mm) | Length L (mm) |
|---|---|---|---|---|---|---|---|---|
SGD 6.20 | 1 Piece(s) | Available | Same day | 10 | 10 | 15 | 16 | |
SGD 6.30 | 1 Piece(s) | Available | Same day | 10 | 10 | 15 | 20 | |
SGD 5.52 | 2 Piece(s) | Available | 5 Day(s) | 10 | 10 | 15 | 25 | |
SGD 6.20 | 1 Piece(s) | Available | Same day | 10 | 12 | 18 | 12 | |
SGD 5.58 | 1 Piece(s) | Available | Same day | 10 | 12 | 18 | 15 | |
SGD 5.70 | 1 Piece(s) | Available | Same day | 10 | 12 | 18 | 16 |
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?