(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Shafts - Both Ends Tapped Hollow Shafts - Not applicable to Both Ends Tapped Hollow Shafts / Both Ends Tapped Hollow with Wrench Flats (Part Numbers)

MISUMI

"[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

Hollow with Wrench Flats/Both Ends Tapped:Related Image

[ ! ]About Hollow Shaft Wall Thickness Deviations, please see >> P.111

[ ! ]Features of Low Temp. Black Chrome Plating
>>P.128
[ ! ]Circularity and O.D. tolerance may not meet precision specification in areas approximately 15mm from wrench flats machined ends.
[ ! ]Circularity, Straightness, Perpendicularity and Changes in Hardness >>P.111
[ ! ]Low temp. black chrome plating is not applied to the inside of hollow shafts, taps, bored holes and lateral holes, and may rust.
[ ! ]Annealing required for wrench flats machining and shaft end threading (effective thread length + approx. 10mm) may lower hardness. >>P.112

Type		[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
Both Ends Tapped	Both Ends Tapped with Wrench Flats	[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
SPJW	SPWR	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardened >>P.112 SUJ2 Equivalent 58HRC~ SUS440C or 13Cr stainless 56HRC~	-
SSPJW	SSPWR	SUS440C or 13Cr stainless		-
PSPJW	PSPWR	SUJ2 Equivalent		Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More
RSPJW	RSPWR	SUJ2 Equivalent		Low Temp. Black Chrome Plating

Specifications

• Both Ends Tapped Hollow Shafts

Part Number	-	L	-	M	-	N	-	SC
SPJW20 SPWR30	- -	500 680	- -	M16 M20	- -	N16 N20	-	SC10

■Both Ends Tapped Hollow Shafts

Part Number		L 1mm Increment	M (Coarse Thread) N (Coarse Thread)				D Tol.	d	C
Type	D	L 1mm Increment	M (Coarse Thread) N (Coarse Thread)				D Tol.	d	C
Both Ends Tapped Hollow Shafts SPJW SSPJW (* marked sizes only) PSPJW	6	20~600	3				-0.004 -0.012	2	0.5 or Less
	*8	20~800 (300)	4	*5			-0.005 -0.014	3(3)	0.5 or Less
	*10	20~800 (400)	5	*6			-0.005 -0.014	4(4)	0.5 or Less
	*12	32~1000 (500)		*8	*T1 (RC1/8)		-0.006 -0.017	6(5)	0.5 or Less
	*13	40~1000 (500)		*10	*T1 (RC1/8)		-0.006 -0.017	7(5)	0.5 or Less
	*16	48~1200 (600)		*12	*T2 (RC1/4)		-0.006 -0.017	10(6)	0.5 or Less
	*20	64~1200 (800)		*16	*T3 (RC3/8)		-0.007 -0.020	14(8)	1.0 or Less
	*25	80~1200 (1000)		*20			-0.007 -0.020	16(10)	1.0 or Less
	*30	80~1500 (1000)		*20			-0.007 -0.020	17(12)	1.0 or Less
	35	96~1500			24		-0.009 -0.025	19	1.0 or Less
	40	96~1500			24	30	-0.009 -0.025	20	1.0 or Less
	50	120~1500				30	-0.009 -0.025	26	1.0 or Less

Part Number		L 1mm Increment	M (Coarse Thread) N (Coarse Thread)			D Tol.	d	C
Type	D	L 1mm Increment	M (Coarse Thread) N (Coarse Thread)			D Tol.	d	C
Both Ends Tapped Hollow Shafts Low Temp. Black Chrome Plating RSPJW	6	20~500	3			-0.004 -0.012	2	0.5 or Less
	8	20~500	4	5		-0.005 -0.014	3	0.5 or Less
	10	20~500	5	6		-0.005 -0.014	4	0.5 or Less
	12	32~500		8	T1 (RC1/8)	-0.006 -0.017	6	0.5 or Less
	13	40~500		10	T1 (RC1/8)	-0.006 -0.017	7	0.5 or Less
	16	48~500		12	T2 (RC1/4)	-0.006 -0.017	10	0.5 or Less
	20	64~500		16	T3 (RC3/8)	-0.007 -0.020	14	1.0 or Less
	25	80~500		20		-0.007 -0.020	16	1.0 or Less
	30	80~500		20		-0.007 -0.020	17	1.0 or Less

Part Number		L 1mm Increment	M (Coarse Thread), N (Coarse Thread)				Wrench Flats Dimensions			D Tol.	d	C
Type	D	L 1mm Increment	M (Coarse Thread), N (Coarse Thread)				SC	W	ℓ₁	D Tol.	d	C
Both Ends Tapped Hollow Shafts with Wrench Flats SPWR SSPWR (* marked sizes only) PSPWR	6	20~600	3				SC=1mm Increment [ ! ]When D≤25 SC+ℓ₁≤L-Nx2 SC≥Mx2 [ ! ]When D≥30 SC+ℓ₁≤L SC≥0 [ ! ]Details of Wrench Flats P.112	5	8	-0.004 -0.012	2	0.5 or Less
	* 8	20~800 (300)	4	* 5				7	8	-0.005 -0.014	3 (3)	0.5 or Less
	* 10	20~800 (400)	5	* 6				8	8	-0.005 -0.014	4 (4)	0.5 or Less
	* 12	32~1000 (500)		* 8	*T1 (RC1/8)			10	10	-0.006 -0.017	6 (5)	0.5 or Less
	* 13	40~1000 (500)		* 10	*T1 (RC1/8)			11	10	-0.006 -0.017	7 (5)	0.5 or Less
	* 16	48~1200 (600)		* 12	*T2 (RC1/4)			14	10	-0.006 -0.017	10 (6)	0.5 or Less
	* 20	64~1200 (800)		* 16	*T3 (RC3/8)			17	10	-0.007 -0.020	14 (8)	1.0 or Less
	* 25	80~1200 (1000)		* 20				22	10	-0.007 -0.020	16 (10)	1.0 or Less
	* 30	80~1500 (1000)		* 20				27	15	-0.007 -0.020	17 (12)	1.0 or Less
	35	96~1500			24			30	15	-0.009 -0.025	19	1.0 or Less
	40	96~1500			24	30		36	20	-0.009 -0.025	20	1.0 or Less
	50	120~1500				30		41	20	-0.009 -0.025	26	1.0 or Less

Part Number		L 1mm Increment	M (Coarse Thread), N (Coarse Thread)			Wrench Flats Dimensions			D Tol.	d	C
Type	D	L 1mm Increment	M (Coarse Thread), N (Coarse Thread)			SC	W	ℓ₁	D Tol.	d	C
Both Ends Tapped Hollow Shafts with Wrench Flats Low Temp. Black Chrome Plating RSPWR	6	20~500	3			SC=1mm Increment [ ! ]When D≤25 SC+ℓ₁≤L-Nx2 SC≥Mx2 [ ! ]When D≥30 SC+ℓ₁≤L SC≥0 [ ! ]Details of Wrench Flats P.112	5	8	-0.004 -0.012	2	0.5 or Less
	8	20~500	4	5			7	8	-0.005 -0.014	3	0.5 or Less
	10	20~500	5	6			8	8	-0.005 -0.014	4	0.5 or Less
	12	32~500		8	T1 (RC1/8)		10	10	-0.006 -0.017	6	0.5 or Less
	13	40~500		10	T1 (RC1/8)		11	10	-0.006 -0.017	7	0.5 or Less
	16	48~500		12	T2 (RC1/4)		14	10	-0.006 -0.017	10	0.5 or Less
	20	64~500		16	T3 (RC3/8)		17	10	-0.007 -0.020	14	1.0 or Less
	25	80~500		20			22	10	-0.007 -0.020	16	1.0 or Less
	30	80~500		20			27	15	-0.007 -0.020	17	1.0 or Less

[ ! ]When T1, T2 or T3 is selected as M or N, tapered thread machining is applied. (Ordering Code: MT1, NT1) [ ! ]L requires Mx2+Nx2≤L.
[ ! ]When Mx25+4+Nx2.5+4≤L, tap pilot holes may go through. [ ! ]When L≤Mx2+Nx2, effective depth of larger diameter tap has priority.
[ ! ]Only * marked D, M and N dimensions are applicable to Stainless Steel Shafts. L and d dimensions in ( ) are applicable.

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
SPJW6-[20-600/1]-M3-N3
SPJW8-[20-800/1]-M[4,5]-N[4,5]
SPJW10-[20-800/1]-M[5,6]-N[5,6]
SPJW12-[32-1000/1]-M8-N8
SPJW12-[32-1000/1]-M8-NT1
SPJW12-[32-1000/1]-MT1-N8
SPJW12-[32-1000/1]-MT1-NT1
SPJW13-[40-1000/1]-M10-N10
SPJW13-[40-1000/1]-M10-NT1
SPJW13-[40-1000/1]-MT1-N10
SPJW13-[40-1000/1]-MT1-NT1
SPJW16-[30-1200/1]-M12-N12
SPJW16-[30-1200/1]-M12-NT2
SPJW16-[30-1200/1]-MT2-N12
SPJW16-[30-1200/1]-MT2-NT2
SPJW20-[30-1200/1]-M16-N16
SPJW20-[30-1200/1]-M16-NT3
SPJW20-[30-1200/1]-MT3-N16
SPJW20-[30-1200/1]-MT3-NT3
SPJW25-[35-1200/1]-M20-N20
SPJW30-[80-1500/1]-M20-N20
SPJW35-[96-1500/1]-M24-N24
SPJW40-[96-1500/1]-M[24,30]-N[24,30]
SPJW50-[120-1500/1]-M30-N30
SPWR6-[20-600/1]-M3-N3-SC[6-586/1]
SPWR8-[20-800/1]-M[4,5]-N[4,5]-SC[8-784/1]
SPWR10-[20-800/1]-M[5,6]-N[5,6]-SC[10-782/1]
SPWR12-[32-1000/1]-M8-N8-SC[5-972/1]
SPWR12-[32-1000/1]-M8-NT1-SC[5-972/1]
SPWR12-[32-1000/1]-MT1-N8-SC[5-972/1]
SPWR12-[32-1000/1]-MT1-NT1-SC[5-972/1]
SPWR13-[40-1000/1]-M10-N10-SC[20-970/1]
SPWR13-[40-1000/1]-M10-NT1-SC[20-970/1]
SPWR13-[40-1000/1]-MT1-N10-SC[20-970/1]
SPWR13-[40-1000/1]-MT1-NT1-SC[20-970/1]
SPWR16-[48-1200/1]-M12-N12-SC[20-1166/1]
SPWR16-[48-1200/1]-M12-NT2-SC[20-1166/1]
SPWR16-[48-1200/1]-MT2-N12-SC[20-1166/1]
SPWR16-[48-1200/1]-MT2-NT2-SC[20-1166/1]
SPWR20-[64-1200/1]-M16-N16-SC[32-1158/1]
SPWR20-[64-1200/1]-M16-NT3-SC[32-1158/1]
SPWR20-[64-1200/1]-MT3-N16-SC[32-1158/1]
SPWR20-[64-1200/1]-MT3-NT3-SC[32-1158/1]
SPWR25-[80-1200/1]-M20-N20-SC[40-1150/1]
SPWR30-[80-1500/1]-M20-N20-SC[0-1485/1]
SPWR35-[96-1500/1]-M24-N24-SC[0-1485/1]
SPWR40-[96-1500/1]-M[24,30]-N[24,30]-SC[0-1480/1]
SPWR50-[120-1500/1]-M30-N30-SC[0-1480/1]
SSPJW8-[20-300/1]-M5-N5
SSPJW10-[20-400/1]-M6-N6
SSPJW12-[32-500/1]-M8-N8
SSPJW12-[32-500/1]-M8-NT1
SSPJW12-[32-500/1]-MT1-N8
SSPJW12-[32-500/1]-MT1-NT1
SSPJW13-[40-500/1]-M10-N10
SSPJW13-[40-500/1]-M10-NT1
SSPJW13-[40-500/1]-MT1-N10
SSPJW13-[40-500/1]-MT1-NT1
SSPJW16-[48-600/1]-M12-N12
SSPJW16-[48-600/1]-M12-NT2
SSPJW16-[48-600/1]-MT2-N12
SSPJW16-[48-600/1]-MT2-NT2
SSPJW20-[64-800/1]-M16-N16
SSPJW20-[64-800/1]-M16-NT3
SSPJW20-[64-800/1]-MT3-N16
SSPJW20-[64-800/1]-MT3-NT3
SSPJW25-[80-1000/1]-M20-N20
SSPJW30-[80-1000/1]-M20-N20
SSPWR8-[20-300/1]-M[4,5]-N[4,5]-SC[8-284/1]
SSPWR10-[20-400/1]-M6-N6-SC[10-382/1]
SSPWR12-[32-500/1]-M8-N8-SC[16-474/1]
SSPWR12-[32-500/1]-M8-NT1-SC[16-474/1]
SSPWR12-[32-500/1]-MT1-N8-SC[16-474/1]
SSPWR12-[32-500/1]-MT1-NT1-SC[16-474/1]
SSPWR13-[40-500/1]-M10-N10-SC[20-470/1]
SSPWR13-[40-500/1]-M10-NT1-SC[20-470/1]
SSPWR13-[40-500/1]-MT1-N10-SC[20-470/1]
SSPWR13-[40-500/1]-MT1-NT1-SC[20-470/1]
SSPWR16-[48-600/1]-M12-N12-SC[10-566/1]
SSPWR16-[48-600/1]-M12-NT2-SC[10-566/1]
SSPWR16-[48-600/1]-MT2-N12-SC[10-566/1]
SSPWR16-[48-600/1]-MT2-NT2-SC[10-566/1]
SSPWR20-[64-800/1]-M16-N16-SC[25-758/1]
SSPWR20-[64-800/1]-M16-NT3-SC[25-758/1]
SSPWR20-[64-800/1]-MT3-N16-SC[25-758/1]
SSPWR20-[64-800/1]-MT3-NT3-SC[25-758/1]
SSPWR25-[80-1000/1]-M20-N20-SC[40-950/1]
SSPWR30-[80-1000/1]-M20-N20-SC[0-985/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Material	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Hardness	Add Wrench Flats at One Location [SC] (mm)	Change Tapped Thread M to Tapered One [MT] 1(RC1/8) 2(RC1/4) 3(RC3/8)	Change Tapped Thread N to Tapered One [NT] 1(RC1/8) 2(RC1/4) 3(RC3/8)	Tapped (Coarse) [M] (mm)	Tapped (Coarse) [N] (mm)
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	6	20 ～ 600	Induction Hardened (58HRC~)	-	-	-	3	3
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	8	20 ～ 800	Induction Hardened (58HRC~)	-	-	-	4 ～ 5	4 ～ 5
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	10	20 ～ 800	Induction Hardened (58HRC~)	-	-	-	5 ～ 6	5 ～ 6
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	12	32 ～ 1000	Induction Hardened (58HRC~)	-	-	-	8	8
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	12	32 ～ 1000	Induction Hardened (58HRC~)	-	-	1	8	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	12	32 ～ 1000	Induction Hardened (58HRC~)	-	1	-	-	8
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	12	32 ～ 1000	Induction Hardened (58HRC~)	-	1	1	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	13	40 ～ 1000	Induction Hardened (58HRC~)	-	-	-	10	10
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	13	40 ～ 1000	Induction Hardened (58HRC~)	-	-	1	10	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	13	40 ～ 1000	Induction Hardened (58HRC~)	-	1	-	-	10
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	13	40 ～ 1000	Induction Hardened (58HRC~)	-	1	1	-	-
-	1 Piece(s)	4 Day(s)	10	[Steel] SUJ2 Equivalent	Not Provided	16	30 ～ 1200	Induction Hardened (58HRC~)	-	-	-	12	12
-	1 Piece(s)	4 Day(s)	10	[Steel] SUJ2 Equivalent	Not Provided	16	30 ～ 1200	Induction Hardened (58HRC~)	-	-	2	12	-
-	1 Piece(s)	4 Day(s)	10	[Steel] SUJ2 Equivalent	Not Provided	16	30 ～ 1200	Induction Hardened (58HRC~)	-	2	-	-	12
-	1 Piece(s)	4 Day(s)	10	[Steel] SUJ2 Equivalent	Not Provided	16	30 ～ 1200	Induction Hardened (58HRC~)	-	2	2	-	-
-	1 Piece(s)	4 Day(s)	10	[Steel] SUJ2 Equivalent	Not Provided	20	30 ～ 1200	Induction Hardened (58HRC~)	-	-	-	16	16
-	1 Piece(s)	4 Day(s)	10	[Steel] SUJ2 Equivalent	Not Provided	20	30 ～ 1200	Induction Hardened (58HRC~)	-	-	3	16	-
-	1 Piece(s)	4 Day(s)	10	[Steel] SUJ2 Equivalent	Not Provided	20	30 ～ 1200	Induction Hardened (58HRC~)	-	3	-	-	16
-	1 Piece(s)	4 Day(s)	10	[Steel] SUJ2 Equivalent	Not Provided	20	30 ～ 1200	Induction Hardened (58HRC~)	-	3	3	-	-
-	1 Piece(s)	4 Day(s)	10	[Steel] SUJ2 Equivalent	Not Provided	25	35 ～ 1200	Induction Hardened (58HRC~)	-	-	-	20	20
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	30	80 ～ 1500	Induction Hardened (58HRC~)	-	-	-	20	20
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	35	96 ～ 1500	Induction Hardened (58HRC~)	-	-	-	24	24
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	40	96 ～ 1500	Induction Hardened (58HRC~)	-	-	-	24 ～ 30	24 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	50	120 ～ 1500	Induction Hardened (58HRC~)	-	-	-	30	30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	6	20 ～ 600	Induction Hardened (58HRC~)	6 ～ 586	-	-	3	3
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	8	20 ～ 800	Induction Hardened (58HRC~)	8 ～ 784	-	-	4 ～ 5	4 ～ 5
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	10	20 ～ 800	Induction Hardened (58HRC~)	10 ～ 782	-	-	5 ～ 6	5 ～ 6
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	12	32 ～ 1000	Induction Hardened (58HRC~)	5 ～ 972	-	-	8	8
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	12	32 ～ 1000	Induction Hardened (58HRC~)	5 ～ 972	-	1	8	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	12	32 ～ 1000	Induction Hardened (58HRC~)	5 ～ 972	1	-	-	8
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	12	32 ～ 1000	Induction Hardened (58HRC~)	5 ～ 972	1	1	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	13	40 ～ 1000	Induction Hardened (58HRC~)	20 ～ 970	-	-	10	10
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	13	40 ～ 1000	Induction Hardened (58HRC~)	20 ～ 970	-	1	10	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	13	40 ～ 1000	Induction Hardened (58HRC~)	20 ～ 970	1	-	-	10
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	13	40 ～ 1000	Induction Hardened (58HRC~)	20 ～ 970	1	1	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	16	48 ～ 1200	Induction Hardened (58HRC~)	20 ～ 1166	-	-	12	12
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	16	48 ～ 1200	Induction Hardened (58HRC~)	20 ～ 1166	-	2	12	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	16	48 ～ 1200	Induction Hardened (58HRC~)	20 ～ 1166	2	-	-	12
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	16	48 ～ 1200	Induction Hardened (58HRC~)	20 ～ 1166	2	2	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	20	64 ～ 1200	Induction Hardened (58HRC~)	32 ～ 1158	-	-	16	16
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	20	64 ～ 1200	Induction Hardened (58HRC~)	32 ～ 1158	-	3	16	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	20	64 ～ 1200	Induction Hardened (58HRC~)	32 ～ 1158	3	-	-	16
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	20	64 ～ 1200	Induction Hardened (58HRC~)	32 ～ 1158	3	3	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	25	80 ～ 1200	Induction Hardened (58HRC~)	40 ～ 1150	-	-	20	20
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	30	80 ～ 1500	Induction Hardened (58HRC~)	0 ～ 1485	-	-	20	20
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	35	96 ～ 1500	Induction Hardened (58HRC~)	0 ～ 1485	-	-	24	24
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	40	96 ～ 1500	Induction Hardened (58HRC~)	0 ～ 1480	-	-	24 ～ 30	24 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Not Provided	50	120 ～ 1500	Induction Hardened (58HRC~)	0 ～ 1480	-	-	30	30
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	8	20 ～ 300	Induction Hardened (56HRC~)	-	-	-	5	5
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	10	20 ～ 400	Induction Hardened (56HRC~)	-	-	-	6	6
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	32 ～ 500	Induction Hardened (56HRC~)	-	-	-	8	8
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	32 ～ 500	Induction Hardened (56HRC~)	-	-	1	8	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	32 ～ 500	Induction Hardened (56HRC~)	-	1	-	-	8
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	32 ～ 500	Induction Hardened (56HRC~)	-	1	1	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	13	40 ～ 500	Induction Hardened (56HRC~)	-	-	-	10	10
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	13	40 ～ 500	Induction Hardened (56HRC~)	-	-	1	10	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	13	40 ～ 500	Induction Hardened (56HRC~)	-	1	-	-	10
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	13	40 ～ 500	Induction Hardened (56HRC~)	-	1	1	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	16	48 ～ 600	Induction Hardened (56HRC~)	-	-	-	12	12
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	16	48 ～ 600	Induction Hardened (56HRC~)	-	-	2	12	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	16	48 ～ 600	Induction Hardened (56HRC~)	-	2	-	-	12
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	16	48 ～ 600	Induction Hardened (56HRC~)	-	2	2	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	20	64 ～ 800	Induction Hardened (56HRC~)	-	-	-	16	16
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	20	64 ～ 800	Induction Hardened (56HRC~)	-	-	3	16	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	20	64 ～ 800	Induction Hardened (56HRC~)	-	3	-	-	16
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	20	64 ～ 800	Induction Hardened (56HRC~)	-	3	3	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	25	80 ～ 1000	Induction Hardened (56HRC~)	-	-	-	20	20
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	30	80 ～ 1000	Induction Hardened (56HRC~)	-	-	-	20	20
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	8	20 ～ 300	Induction Hardened (56HRC~)	8 ～ 284	-	-	4 ～ 5	4 ～ 5
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	10	20 ～ 400	Induction Hardened (56HRC~)	10 ～ 382	-	-	6	6
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	32 ～ 500	Induction Hardened (56HRC~)	16 ～ 474	-	-	8	8
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	32 ～ 500	Induction Hardened (56HRC~)	16 ～ 474	-	1	8	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	32 ～ 500	Induction Hardened (56HRC~)	16 ～ 474	1	-	-	8
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	32 ～ 500	Induction Hardened (56HRC~)	16 ～ 474	1	1	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	13	40 ～ 500	Induction Hardened (56HRC~)	20 ～ 470	-	-	10	10
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	13	40 ～ 500	Induction Hardened (56HRC~)	20 ～ 470	-	1	10	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	13	40 ～ 500	Induction Hardened (56HRC~)	20 ～ 470	1	-	-	10
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	13	40 ～ 500	Induction Hardened (56HRC~)	20 ～ 470	1	1	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	16	48 ～ 600	Induction Hardened (56HRC~)	10 ～ 566	-	-	12	12
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	16	48 ～ 600	Induction Hardened (56HRC~)	10 ～ 566	-	2	12	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	16	48 ～ 600	Induction Hardened (56HRC~)	10 ～ 566	2	-	-	12
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	16	48 ～ 600	Induction Hardened (56HRC~)	10 ～ 566	2	2	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	20	64 ～ 800	Induction Hardened (56HRC~)	25 ～ 758	-	-	16	16
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	20	64 ～ 800	Induction Hardened (56HRC~)	25 ～ 758	-	3	16	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	20	64 ～ 800	Induction Hardened (56HRC~)	25 ～ 758	3	-	-	16
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	20	64 ～ 800	Induction Hardened (56HRC~)	25 ～ 758	3	3	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	25	80 ～ 1000	Induction Hardened (56HRC~)	40 ～ 950	-	-	20	20
-	1 Piece(s)	6 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	30	80 ～ 1000	Induction Hardened (56HRC~)	0 ～ 985	-	-	20	20

Example

Product TOP

Basic Information

Basic Shape	Hollow	End Shape (Left)	Tapped	End Shape (Right)	Tapped
Heat Treatment	Induction Hardened	Shaft Fit Tolerance	g6

Configure

178 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
- Stainless Steel
  - SUS440C or 13Cr stainless
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
6

8

10

12

13

16

20

25

30

35

40

50
Clear
Length L(mm)
[20-1500/1mm Unit(s)]
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
Clear
Add Wrench Flats at One Location [SC](mm)
[0-1485/1mm Unit(s)]
Clear
Change Tapped Thread M to Tapered One [MT] 1(RC1/8) 2(RC1/4) 3(RC3/8)
1

2

3
Clear
Change Tapped Thread N to Tapered One [NT] 1(RC1/8) 2(RC1/4) 3(RC3/8)
1

2

3
Clear
Tapped (Coarse) [M](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse) [N](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
type
- PSPJW
- PSPWR
- RSPJW
- RSPWR
- SPJW
- SPWR
- SSPJW
- SSPWR
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

4 Day(s) or Less

6 Day(s) or Less

9 Day(s) or Less

11 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(65) 6733 7211 / FAX：(65) 6733 0211; 9:00am - 6:00pm (Monday - Friday); Technical Inquiry

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

Shafts - Both Ends Tapped Hollow Shafts - Not applicable to Both Ends Tapped Hollow Shafts / Both Ends Tapped Hollow with Wrench Flats (Part Numbers)

Specifications

Alterations

Part Number

Example

Basic Information

Configure

Specification/Dimensions

Material

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Hardness

Add Wrench Flats at One Location [SC](mm)

Change Tapped Thread M to Tapered One [MT] 1(RC1/8) 2(RC1/4) 3(RC3/8)

Change Tapped Thread N to Tapered One [NT] 1(RC1/8) 2(RC1/4) 3(RC3/8)

Tapped (Coarse) [M](mm)

Tapped (Coarse) [N](mm)

type

CAD

Days to Ship

Specify Alterations

Tech Support

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)