(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Linear Shafts - Set Screw Grooved

MISUMI

[Features] Linear shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with grooves for set screws.

Part Number

Configured Part Number is shown.

Ends Grooved/Threaded/Tapped/Stepped:Related Image

[ ! ]Annealing could reduce hardness at set screw grooved shaft end machined areas (effective thread length + approx. 10mm).
[ ! ]Circularity, Straightness, Perpendicularity, Concentricity, Changes in Hardness >> P.111
[ ! ]Features of Low Temp. Black Chrome Plating >> P.128

Type					[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
Solid, Both Ends Grooved	Solid, One End Grooved	One End Tapped	One End Threaded	One End Threaded with O.D. same as Shaft O.D.	[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
SFJQ	SFJS	SFTS	SFNS	SFQS	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardened >>P.112 SUJ2 Equivalent 58HRC~ SUS440C or 13Cr stainless 56HRC~	-
SSFJQ	SSFJS	SSFTS	SSFNS	SSFQS	SUS440C or 13Cr stainless		-
PSFJQ	PSFJS	PSFTS	PSFNS	PSFQS	SUJ2 Equivalent		Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More
PSSFJQ	PSSFJS	PSSFTS	PSSFNS	PSSFQS	SUS440C or 13Cr stainless

Specifications

Part Number	-	L	-	M	-	F	-	B	-	P	-	V	-	K	-	G	-	Q
SFJQ16	-	100									-	V10	-	K5	-	G10	-	Q5
SSFTS20	-	500	-	M10											-	G10	-	Q7
PSFNS8	-	650			-	F10	-	B8	-	P4					-	G20	-	Q4

Part Number		L 1mm Increment	Slot Dimension						D Tol.	C
Type	D	L 1mm Increment	V, G (0.1mm Increment)	K, Q				D₁	g6	C
Solid, Both Ends Grooved SFJQ SSFJQ PSFJQ PSSFJQ	6	20~600	5~18	4				5	-0.004 -0.012	0.5 or Less
	8	20~800	5~24	4	5			7	-0.005 -0.014	0.5 or Less
	10	20~800	5~30	4	5			9	-0.005 -0.014	0.5 or Less
	12	20~1000	5~36		5			10	-0.006 -0.017	0.5 or Less
	13	25~1000	5~39		5			11	-0.006 -0.017	0.5 or Less
	15	25~1000	5~45		5	6		13	-0.006 -0.017	0.5 or Less
	16	30~1200	5~48		5	6		14	-0.006 -0.017	0.5 or Less
	18	30~1200	5~54		5	6		16	-0.006 -0.017	0.5 or Less
	20	30~1200	6~60			6	7	18	-0.007 -0.020	1.0 or Less
	25	35~1200	6~75			6	7	23	-0.007 -0.020	1.0 or Less
	30	35~1500	6~90				7	28	-0.007 -0.020	1.0 or Less

Part Number		L 1mm Increment	Slot Dimension						D Tol.	C
Type	D	L 1mm Increment	G (0.1mm Increment)	Q				D₁	g6	C
Solid, One End Grooved SFJS SSFJS PSFJS PSSFJS	6	20~600	5~18	4				5	-0.004 -0.012	0.5 or Less
	8	20~800	5~24	4	5			7	-0.005 -0.014	0.5 or Less
	10	20~800	5~30	4	5			9	-0.005 -0.014	0.5 or Less
	12	20~1000	5~36		5			10	-0.006 -0.017	0.5 or Less
	13	25~1000	5~39		5			11	-0.006 -0.017	0.5 or Less
	15	25~1000	5~45		5	6		13	-0.006 -0.017	0.5 or Less
	16	30~1200	5~48		5	6		14	-0.006 -0.017	0.5 or Less
	18	30~1200	5~54		5	6		16	-0.006 -0.017	0.5 or Less
	20	30~1200	6~60			6	7	18	-0.007 -0.020	1.0 or Less
	25	35~1200	6~75			6	7	23	-0.007 -0.020	1.0 or Less
	30	35~1500	6~90				7	28	-0.007 -0.020	1.0 or Less

Part Number		L 1mm Increment	One End Tapped										Slot Dimension						D Tol.	C
Type	D	L 1mm Increment	M (Coarse Thread)										G (0.1mm Increment)	Q				D₁	g6	C
One End Tapped Type SFTS SSFTS PSFTS PSSFTS	6	20~600	3										5~18	4				5	-0.004 -0.012	0.5 or Less
	8	20~800	3	4	5								5~24	4	5			7	-0.005 -0.014	0.5 or Less
	10	20~800	3	4	5	6							5~30	4	5			9	-0.005 -0.014	0.5 or Less
	12	20~1000		4	5	6	8						5~36		5			10	-0.006 -0.017	0.5 or Less
	13	25~1000		4	5	6	8						5~39		5			11	-0.006 -0.017	0.5 or Less
	15	25~1000		4	5	6	8	10					5~45		5	6		13	-0.006 -0.017	0.5 or Less
	16	30~1200		4	5	6	8	10					5~48		5	6		14	-0.006 -0.017	0.5 or Less
	18	30~1200		4	5	6	8	10	12				5~54		5	6		16	-0.006 -0.017	0.5 or Less
	20	30~1200		4	5	6	8	10	12				6~60			6	7	18	-0.007 -0.020	1.0 or Less
	25	35~1200		4	5	6	8	10	12	16			6~75			6	7	23	-0.007 -0.020	1.0 or Less
	30	35~1500				6	8	10	12	16	20	24	6~90				7	28	-0.007 -0.020	1.0 or Less

[ ! ]V+K/2+1≤L/2 or G+Q/2+1≤L/2 is required. [ ! ]For One End Tapped Type, G≤L-Mx2-Qx2 is required.
[ ! ]When Mx2.5+4≥L, tap pilot holes may go through.

Part Number		1mm Increment			Selection											Slot Dimension						D Tol.	(Y)Max.	R	C
Type	D	L	F	B	P											G (1mm Increment)	Q (Selection)				D₁	g6	(Y)Max.	R	C
Threaded Type SFNS SSFNS PSFNS PSSFNS	6	25~598	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 [ ! ]B≥Pitchx3	3	4	5	6								5~18	4				5	-0.004 -0.012	600	0.3 or Less	0.5 or Less
	8	25~798			3	4	5	6	8							5~24	4	5			7	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~798				4	5	6	8	10						5~30	4	5			9	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~998					5	6	8	10	12					5~36		5			11	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~998					5	6	8	10	12					5~39		5			11	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~998					5	6	8	10	12					5~45		5	6		13	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~1198					5	6	8	10	12	16				5~48		5	6		14	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~1198					5	6	8	10	12	16				5~54		5	6		16	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~1198						6	8	10	12	16	20			6~60			6	7	18	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~1198							8	10	12	16	20	24		6~75			6	7	23	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~1498							8	10	12	16	20	24	30	6~90				7	28	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

Part Number		1mm Increment		Slot Dimension						D Tol.	(Y)Max.	C
Type	D	L	B	G (1mm Increment)	Q (Selection)				D₁	g6	(Y)Max.	C
One End Threaded with O.D. same as Shaft O.D. SFQS SSFQS PSFQS PSSFQS	6	25~598	Pitchx3≤B≤Mx5 [ ! ]For One End Threaded with O.D. same as Shaft O.D., L dimensions have priority, thus the effective thread length will be B-(Pitchx2).	5~18	4				5	-0.004 -0.012	600	0.5 or Less
	8	25~798		5~24	4	5			7	-0.005 -0.014	800	0.5 or Less
	10	25~798		5~30	4	5			9	-0.005 -0.014	800	0.5 or Less
	12	25~998		5~36		5			11	-0.006 -0.017	1000	0.5 or Less
	16	25~1198		5~48		5	6		14	-0.006 -0.017	1200	0.5 or Less
	20	25~1198		6~60			6	7	18	-0.007 -0.020	1200	1.0 or Less
	30	25~1498		6~90				7	28	-0.007 -0.020	1500	1.0 or Less

[ ! ]V+K/2+1≤L/2 or G+Q/2+1≤L/2 is required.

Coarse Thread Dimension
M	Pitch
3	0.5
4	0.7
5	0.8
6	1.0
8	1.25
10	1.5
12	1.75
16	2.0
20	2.5
24	3.0
30	3.5

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
Next >>

Part Number
PSFJQ6-[20-600/1]-V[5-18/1]-K4-G[5-18/1]-Q4
PSFJQ8-[20-800/1]-V[5-24/1]-K[4,5]-G[5-24/1]-Q[4,5]
PSFJQ10-[20-800/1]-V[5-30/1]-K[4,5]-G[5-30/1]-Q[4,5]
PSFJQ12-[20-1000/1]-V[5-36/1]-K5-G[5-36/1]-Q5
PSFJQ13-[25-1000/1]-V[5-39/1]-K5-G[5-39/1]-Q5
PSFJQ15-[25-1000/1]-V[5-45/1]-K[5,6]-G[5-45/1]-Q[5,6]
PSFJQ16-[30-1200/1]-V[5-48/1]-K[5,6]-G[5-48/1]-Q[5,6]
PSFJQ18-[30-1200/1]-V[5-54/1]-K[5,6]-G[5-54/1]-Q[5,6]
PSFJQ20-[30-1200/1]-V[6-60/1]-K[6,7]-G[6-60/1]-Q[6,7]
PSFJQ25-[30-1200/1]-V[6-75/1]-K[6,7]-G[6-75/1]-Q[6,7]
PSFJQ30-[35-1500/1]-V[6-90/1]-K7-G[6-90/1]-Q7
PSFJS6-[20-600/1]-G[5-18/1]-Q4
PSFJS8-[20-800/1]-G[5-24/1]-Q[4,5]
PSFJS10-[20-800/1]-G[5-30/1]-Q[4,5]
PSFJS12-[20-1000/1]-G[5-36/1]-Q5
PSFJS13-[25-1000/1]-G[5-39/1]-Q5
PSFJS15-[25-1000/1]-G[5-45/1]-Q[5,6]
PSFJS16-[30-1200/1]-G[5-48/1]-Q[5,6]
PSFJS18-[30-1200/1]-G[5-54/1]-Q[5,6]
PSFJS20-[30-1200/1]-G[6-60/1]-Q[6,7]
PSFJS25-[30-1200/1]-G[6-75/1]-Q[6,7]
PSFJS30-[35-1500/1]-G[6-90/1]-Q7
PSFNS6-[20-600/1]-F[2-30/1]-B[2-28/1]-P[3,4,5,6]-G[5-18/1]-Q4
PSFNS8-[20-800/1]-F[2-40/1]-B[2-37/1]-P[3,4,5,6,8]-G[5-24/1]-Q[4,5]
PSFNS10-[20-800/1]-F[2-50/1]-B[2-47/1]-P[4,5,6,8,10]-G[5-30/1]-Q[4,5]
PSFNS12-[20-1000/1]-F[2-60/1]-B[2-55/1]-P[5,6,8,10,12]-G[5-36/1]-Q5
PSFNS13-[25-1000/1]-F[2-60/1]-B[2-55/1]-P[5,6,8,10,12]-G[5-39/1]-Q5
PSFNS15-[25-998/1]-F[2-60/1]-B[2-55/1]-P[5,6,8,10,12]-G[5-45/1]-Q[5,6]
PSFNS16-[30-1200/1]-F[2-80/1]-B[2-75/1]-P[5,6,8,10,12,16]-G[5-48/1]-Q[5,6]
PSFNS18-[30-1200/1]-F[2-80/1]-B[2-75/1]-P[5,6,8,10,12,16]-G[5-54/1]-Q[5,6]
PSFNS20-[30-1200/1]-F[2-100/1]-B[2-95/1]-P[6,8,10,12,16,20]-G[6-60/1]-Q[6,7]
PSFNS25-[30-1200/1]-F[2-120/1]-B[2-115/1]-P[8,10,12,16,20,24]-G[6-75/1]-Q[6,7]
PSFNS30-[35-1500/1]-F[2-150/1]-B[2-145/1]-P[8,10,12,16,20,24,30]-G[6-90/1]-Q7
PSFQS6-[20-600/1]-B[2-28/1]-G[5-18/1]-Q4
PSFQS8-[20-800/1]-B[2-37/1]-G[5-24/1]-Q[4,5]
PSFQS10-[20-800/1]-B[2-47/1]-G[5-30/1]-Q[4,5]
PSFQS12-[20-1000/1]-B[2-55/1]-G[5-36/1]-Q5
PSFQS16-[30-1200/1]-B[2-75/1]-G[5-48/1]-Q[5,6]
PSFQS20-[30-1200/1]-B[2-95/1]-G[6-60/1]-Q[6,7]
PSFQS30-[35-1500/1]-B[2-145/1]-G[6-90/1]-Q7
PSFTS6-[20-600/1]-M3-G[5-18/1]-Q4
PSFTS8-[20-800/1]-M[3,4,5]-G[5-24/1]-Q[4,5]
PSFTS10-[20-800/1]-M[3,4,5,6]-G[5-30/1]-Q[4,5]
PSFTS12-[20-1000/1]-M[4,5,6,8]-G[5-36/1]-Q5
PSFTS13-[25-1000/1]-M[4,5,6,8]-G[5-39/1]-Q5
PSFTS15-[25-1000/1]-M[4,5,6,8,10]-G[5-45/1]-Q[5,6]
PSFTS16-[30-1200/1]-M[4,5,6,8,10]-G[5-48/1]-Q[5,6]
PSFTS18-[30-1200/1]-M[4,5,6,8,10,12]-G[5-54/1]-Q[5,6]
PSFTS20-[30-1200/1]-M[4,5,6,8,10,12]-G[6-60/1]-Q[6,7]
PSFTS25-[30-1200/1]-M[4,5,6,8,10,12,16]-G[6-75/1]-Q[6,7]
PSFTS30-[35-1500/1]-M[6,8,10,12,16,20,24]-G[6-90/1]-Q7
PSSFJQ6-[20-600/1]-V[5-18/1]-K4-G[5-18/1]-Q4
PSSFJQ8-[20-800/1]-V[5-24/1]-K[4,5]-G[5-24/1]-Q[4,5]
PSSFJQ10-[20-800/1]-V[5-30/1]-K[4,5]-G[5-30/1]-Q[4,5]
PSSFJQ12-[20-1000/1]-V[5-36/1]-K5-G[5-36/1]-Q5
PSSFJQ13-[25-1000/1]-V[5-39/1]-K5-G[5-39/1]-Q5
PSSFJQ15-[25-1000/1]-V[5-45/1]-K[5,6]-G[5-45/1]-Q[5,6]
PSSFJQ16-[30-1200/1]-V[5-48/1]-K[5,6]-G[5-48/1]-Q[5,6]
PSSFJQ18-[30-1200/1]-V[5-54/1]-K[5,6]-G[5-54/1]-Q[5,6]
PSSFJQ20-[30-1200/1]-V[6-60/1]-K[6,7]-G[6-60/1]-Q[6,7]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	End Shape (Left)	Material	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Hardness	Shaft End Type	B (mm)	F (mm)	G (mm)	K (mm)	Q (mm)	Tapped (Coarse) [M] (mm)	Threaded (Coarse) [P] (mm)	V (mm)
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6	20 ～ 600	Induction Hardened (58HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 18	4	4	-	-	5 ～ 18
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Steel] SUJ2 Equivalent	Hard Chrome Plating	8	20 ～ 800	Induction Hardened (58HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 24	4 ～ 5	4 ～ 5	-	-	5 ～ 24
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Steel] SUJ2 Equivalent	Hard Chrome Plating	10	20 ～ 800	Induction Hardened (58HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 30	4 ～ 5	4 ～ 5	-	-	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Steel] SUJ2 Equivalent	Hard Chrome Plating	12	20 ～ 1000	Induction Hardened (58HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 36	5	5	-	-	5 ～ 36
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Steel] SUJ2 Equivalent	Hard Chrome Plating	13	25 ～ 1000	Induction Hardened (58HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 39	5	5	-	-	5 ～ 39
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Steel] SUJ2 Equivalent	Hard Chrome Plating	15	25 ～ 1000	Induction Hardened (58HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 45	5 ～ 6	5 ～ 6	-	-	5 ～ 45
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16	30 ～ 1200	Induction Hardened (58HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 48	5 ～ 6	5 ～ 6	-	-	5 ～ 48
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Steel] SUJ2 Equivalent	Hard Chrome Plating	18	30 ～ 1200	Induction Hardened (58HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 54	5 ～ 6	5 ～ 6	-	-	5 ～ 54
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Steel] SUJ2 Equivalent	Hard Chrome Plating	20	30 ～ 1200	Induction Hardened (58HRC~)	Solid, Both Ends Grooved	-	-	6 ～ 60	6 ～ 7	6 ～ 7	-	-	6 ～ 60
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Steel] SUJ2 Equivalent	Hard Chrome Plating	25	30 ～ 1200	Induction Hardened (58HRC~)	Solid, Both Ends Grooved	-	-	6 ～ 75	6 ～ 7	6 ～ 7	-	-	6 ～ 75
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Steel] SUJ2 Equivalent	Hard Chrome Plating	30	35 ～ 1500	Induction Hardened (58HRC~)	Solid, Both Ends Grooved	-	-	6 ～ 90	7	7	-	-	6 ～ 90
-	1 Piece(s)	6 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6	20 ～ 600	Induction Hardened (58HRC~)	Solid, One End Grooved	-	-	5 ～ 18	-	4	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	8	20 ～ 800	Induction Hardened (58HRC~)	Solid, One End Grooved	-	-	5 ～ 24	-	4 ～ 5	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	10	20 ～ 800	Induction Hardened (58HRC~)	Solid, One End Grooved	-	-	5 ～ 30	-	4 ～ 5	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	12	20 ～ 1000	Induction Hardened (58HRC~)	Solid, One End Grooved	-	-	5 ～ 36	-	5	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	13	25 ～ 1000	Induction Hardened (58HRC~)	Solid, One End Grooved	-	-	5 ～ 39	-	5	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	15	25 ～ 1000	Induction Hardened (58HRC~)	Solid, One End Grooved	-	-	5 ～ 45	-	5 ～ 6	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16	30 ～ 1200	Induction Hardened (58HRC~)	Solid, One End Grooved	-	-	5 ～ 48	-	5 ～ 6	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	18	30 ～ 1200	Induction Hardened (58HRC~)	Solid, One End Grooved	-	-	5 ～ 54	-	5 ～ 6	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	20	30 ～ 1200	Induction Hardened (58HRC~)	Solid, One End Grooved	-	-	6 ～ 60	-	6 ～ 7	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	25	30 ～ 1200	Induction Hardened (58HRC~)	Solid, One End Grooved	-	-	6 ～ 75	-	6 ～ 7	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	30	35 ～ 1500	Induction Hardened (58HRC~)	Solid, One End Grooved	-	-	6 ～ 90	-	7	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6	20 ～ 600	Induction Hardened (58HRC~)	One End Threaded	2 ～ 28	2 ～ 30	5 ～ 18	-	4	-	3 ～ 6	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	8	20 ～ 800	Induction Hardened (58HRC~)	One End Threaded	2 ～ 37	2 ～ 40	5 ～ 24	-	4 ～ 5	-	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	10	20 ～ 800	Induction Hardened (58HRC~)	One End Threaded	2 ～ 47	2 ～ 50	5 ～ 30	-	4 ～ 5	-	4 ～ 10	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	12	20 ～ 1000	Induction Hardened (58HRC~)	One End Threaded	2 ～ 55	2 ～ 60	5 ～ 36	-	5	-	5 ～ 12	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	13	25 ～ 1000	Induction Hardened (58HRC~)	One End Threaded	2 ～ 55	2 ～ 60	5 ～ 39	-	5	-	5 ～ 12	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	15	25 ～ 998	Induction Hardened (58HRC~)	One End Threaded	2 ～ 55	2 ～ 60	5 ～ 45	-	5 ～ 6	-	5 ～ 12	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16	30 ～ 1200	Induction Hardened (58HRC~)	One End Threaded	2 ～ 75	2 ～ 80	5 ～ 48	-	5 ～ 6	-	5 ～ 16	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	18	30 ～ 1200	Induction Hardened (58HRC~)	One End Threaded	2 ～ 75	2 ～ 80	5 ～ 54	-	5 ～ 6	-	5 ～ 16	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	20	30 ～ 1200	Induction Hardened (58HRC~)	One End Threaded	2 ～ 95	2 ～ 100	6 ～ 60	-	6 ～ 7	-	6 ～ 20	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	25	30 ～ 1200	Induction Hardened (58HRC~)	One End Threaded	2 ～ 115	2 ～ 120	6 ～ 75	-	6 ～ 7	-	8 ～ 24	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	30	35 ～ 1500	Induction Hardened (58HRC~)	One End Threaded	2 ～ 145	2 ～ 150	6 ～ 90	-	7	-	8 ～ 30	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6	20 ～ 600	Induction Hardened (58HRC~)	One End Threaded with O.D. same as Shaft O.D.	-	-	5 ～ 18	-	4	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	8	20 ～ 800	Induction Hardened (58HRC~)	One End Threaded with O.D. same as Shaft O.D.	-	-	5 ～ 24	-	4 ～ 5	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	10	20 ～ 800	Induction Hardened (58HRC~)	One End Threaded with O.D. same as Shaft O.D.	-	-	5 ～ 30	-	4 ～ 5	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	12	20 ～ 1000	Induction Hardened (58HRC~)	One End Threaded with O.D. same as Shaft O.D.	-	-	5 ～ 36	-	5	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16	30 ～ 1200	Induction Hardened (58HRC~)	One End Threaded with O.D. same as Shaft O.D.	-	-	5 ～ 48	-	5 ～ 6	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	20	30 ～ 1200	Induction Hardened (58HRC~)	One End Threaded with O.D. same as Shaft O.D.	-	-	6 ～ 60	-	6 ～ 7	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	30	35 ～ 1500	Induction Hardened (58HRC~)	One End Threaded with O.D. same as Shaft O.D.	-	-	6 ～ 90	-	7	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6	20 ～ 600	Induction Hardened (58HRC~)	One End Tapped	-	-	5 ～ 18	-	4	3	-	-
-	1 Piece(s)	6 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	8	20 ～ 800	Induction Hardened (58HRC~)	One End Tapped	-	-	5 ～ 24	-	4 ～ 5	3 ～ 5	-	-
-	1 Piece(s)	6 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	10	20 ～ 800	Induction Hardened (58HRC~)	One End Tapped	-	-	5 ～ 30	-	4 ～ 5	3 ～ 6	-	-
-	1 Piece(s)	6 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	12	20 ～ 1000	Induction Hardened (58HRC~)	One End Tapped	-	-	5 ～ 36	-	5	4 ～ 8	-	-
-	1 Piece(s)	6 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	13	25 ～ 1000	Induction Hardened (58HRC~)	One End Tapped	-	-	5 ～ 39	-	5	4 ～ 8	-	-
-	1 Piece(s)	6 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	15	25 ～ 1000	Induction Hardened (58HRC~)	One End Tapped	-	-	5 ～ 45	-	5 ～ 6	4 ～ 10	-	-
-	1 Piece(s)	6 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16	30 ～ 1200	Induction Hardened (58HRC~)	One End Tapped	-	-	5 ～ 48	-	5 ～ 6	4 ～ 10	-	-
-	1 Piece(s)	6 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	18	30 ～ 1200	Induction Hardened (58HRC~)	One End Tapped	-	-	5 ～ 54	-	5 ～ 6	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	20	30 ～ 1200	Induction Hardened (58HRC~)	One End Tapped	-	-	6 ～ 60	-	6 ～ 7	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	25	30 ～ 1200	Induction Hardened (58HRC~)	One End Tapped	-	-	6 ～ 75	-	6 ～ 7	4 ～ 16	-	-
-	1 Piece(s)	6 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	30	35 ～ 1500	Induction Hardened (58HRC~)	One End Tapped	-	-	6 ～ 90	-	7	6 ～ 24	-	-
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6	20 ～ 600	Induction Hardened (56HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 18	4	4	-	-	5 ～ 18
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	8	20 ～ 800	Induction Hardened (56HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 24	4 ～ 5	4 ～ 5	-	-	5 ～ 24
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	10	20 ～ 800	Induction Hardened (56HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 30	4 ～ 5	4 ～ 5	-	-	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	12	20 ～ 1000	Induction Hardened (56HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 36	5	5	-	-	5 ～ 36
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	13	25 ～ 1000	Induction Hardened (56HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 39	5	5	-	-	5 ～ 39
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	15	25 ～ 1000	Induction Hardened (56HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 45	5 ～ 6	5 ～ 6	-	-	5 ～ 45
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16	30 ～ 1200	Induction Hardened (56HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 48	5 ～ 6	5 ～ 6	-	-	5 ～ 48
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	18	30 ～ 1200	Induction Hardened (56HRC~)	Solid, Both Ends Grooved	-	-	5 ～ 54	5 ～ 6	5 ～ 6	-	-	5 ～ 54
-	1 Piece(s)	6 Day(s) or more	10	Set Screw Grooved	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	20	30 ～ 1200	Induction Hardened (56HRC~)	Solid, Both Ends Grooved	-	-	6 ～ 60	6 ～ 7	6 ～ 7	-	-	6 ～ 60

1
2
3
4
Next >>

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Right)	Set Screw Grooved	Shaft End Perpendicularity	Perpendicularity (0.2)
Heat Treatment	Induction Hardened	Shaft Fit Tolerance	g6

Configure

204 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

End Shape (Left)
- No Machining
- Tapped
- Threaded
- Set Screw Grooved
Clear
Material
- Steel
  - SUJ2 Equivalent
- Stainless Steel
  - SUS440C or 13Cr stainless
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
Clear
Shaft Dia. D(Ø)
6

8

10

12

13

15

16

18

20

25

30
Clear
Length L(mm)
[20-10000/1mm Unit(s)]
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
Clear
Shaft End Type
- One End Tapped
- One End Threaded
- One End Threaded with O.D. same as Shaft O.D.
- Solid, Both Ends Grooved
- Solid, One End Grooved
Clear
B(mm)
[2-145/1mm Unit(s)]
Clear
F(mm)
[2-150/1mm Unit(s)]
Clear
G(mm)
[5-90/1mm Unit(s)]
Clear
K(mm)
4

5

6

7
Clear
Q(mm)
4

5

6

7
Clear
Tapped (Coarse) [M](mm)
3

4

5

6

8

10

12

16

20

24
Clear
Threaded (Coarse) [P](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
V(mm)
[5-90/1mm Unit(s)]
Clear
type
- PSFJQ
- PSFJS
- PSFNS
- PSFQS
- PSFTS
- PSSFJQ
- PSSFJS
- PSSFNS
- PSSFQS
- PSSFTS
- SFJQ
- SFJS
- SFNS
- SFQS
- SFTS
- SSFJQ
- SSFJS
- SSFNS
- SSFQS
- SSFTS
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(65) 6733 7211 / FAX：(65) 6733 0211; 9:00am - 6:00pm (Monday - Friday); Technical Inquiry

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

Linear Shafts - Set Screw Grooved

Specifications

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

End Shape (Left)

Material

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Hardness

Shaft End Type

B(mm)

F(mm)

G(mm)

K(mm)

Q(mm)

Tapped (Coarse) [M](mm)

Threaded (Coarse) [P](mm)

V(mm)

type

CAD

Days to Ship

Specify Alterations

Tech Support

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)