(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Linear Shafts-One Ends Threaded (Part Numbers)

MISUMI

[Features] Direct-acting shafts (linear shafts, hardened shafts, guide shafts, slide shafts) are male threaded on one end, female threaded on one end with a drilled hole, and have a spanner groove.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

Linear Shafts-Both Ends Threaded:Related Image

Type					[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
With Wrench Flats			With Cross-Drilled Hole
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. f8
SFAZ	SFZU	-	SFZH	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent 58HRC~ SUS440C or 13Cr stainless 56HRC~	-
SSFAZ	SSFZU	-	SSFZH	-	SUS440C or 13Cr stainless		-
PSFAZ	PSFZU	-	PSFZH	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFAZ	PSSFZU	-	PSSFZH	-	SUS440C or 13Cr stainless
RSFAZ	-	-	RSFZH	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSGGZ	-	PSGZH	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSGGZ	-		SUS304	-

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	B	-	P	-	N	-	SC	-	H
SFAZ20 SSFZH20	- -	277 277	- -	F25 F25	- -	B12 B12	- -	P10 P10	- -	N12 N12	-	SC10	-	H10

Part Number			1mm Increments			P (Coarse) Selection											N (Coarse) Selection											Wrench Flats Dimensions			D Tol.			(Y)Max.	R	C
Type		D	L	F	B	P (Coarse) Selection											N (Coarse) Selection											SC	W	ℓ₁	g6	h5	f8	(Y)Max.	R	C
(With Wrench Flats) (D Tol. g6) SFAZ SSFAZ PSFAZ PSSFAZ (D Tol. f8)PSGGZ PSSGGZ	(D Tol. h5) SFZU SSFZU PSFZU PSSFZU	6	25~798	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 [ ! ]B≥Pitchx3	3	4	5	6								3											SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >>P.142	5	8	-0.004 -0.012	0 -0.005	-0.010 -0.028	600	0.3 or Less	0.5 or Less
		8	25~998			3	4	5	6	8							3	4	5										7	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~998				4	5	6	8	10						3	4	5	6									8	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~1198					5	6	8	10	12						4	5	6	8								10	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~1198					5	6	8	10	12						4	5	6	8								11	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~1198					5	6	8	10	12						4	5	6	8	10							13	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1198					5	6	8	10	12	16					4	5	6	8	10							14	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1198					5	6	8	10	12	16					4	5	6	8	10	12						16	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1198						6	8	10	12	16	20				4	5	6	8	10	12						17	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1198							8	10	12	16	20	24			4	5	6	8	10	12	16					22	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1498							8	10	12	16	20	24	30				6	8	10	12	16	20				27	15	-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1498								10	12	16	20	24	30					8	10	12	16	20	24			30	15	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	40~1498									12	16	20	24	30						10	12	16	20	24	30		36	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	50~1498										16	20	24	30							12	16	20	24	30		41	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Part Number		1mm Increments			P (Coarse) Selection											N (Coarse) Selection									Cross-Drilled Hole Dimensions		D Tol.		(Y)Max.	R	C
Type	D	L	F	B	P (Coarse) Selection											N (Coarse) Selection									H	d	g6	f8	(Y)Max.	R	C
(With Cross-Drilled Hole) (D Tol. g6) SFZH SSFZH PSFZH PSSFZH RSFZH (D Tol. f8) PSGZH [ ! ]8≤D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.	8	25~500	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 [ ! ]B≥Pitchx3	3	4	5	6	8							3	4	5							H=1mm Increment [ ! ]L≥H+d/2+6+Nx2.5 [ ! ]H≥d/2+2	3	-0.005 -0.014	-0.013 -0.035	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8	10						3	4	5	6							3	-0.005 -0.014	-0.013 -0.035	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10	12						4	5	6	8						3	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12						4	5	6	8						4	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12						4	5	6	8	10					4	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12	16					4	5	6	8	10					4	-0.006 -0.017	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16					4	5	6	8	10	12				6	-0.006 -0.017	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16	20				4	5	6	8	10	12				6	-0.007 -0.020	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24			4	5	6	8	10	12	16			7	-0.007 -0.020	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24	30				6	8	10	12	16	20		7	-0.007 -0.020	-0.020 -0.053	1500	0.3 or Less	1.0 or Less

Part Number		1mm Increments			P (Coarse) Selection											N (Coarse) Selection									Wrench Flats Dimensions			D Tol.	(Y)Max.	R	C
Type	D	L	F	B	P (Coarse) Selection											N (Coarse) Selection									SC	W	ℓ₁	g6	(Y)Max.	R	C
(With Wrench Flats) (D Tol. g6) Low Temp. Black Chrome Plating RSFAZ	6	25~500	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 [ ! ]B≥Pitchx3	3	4	5	6								3									SC = 1mm Increment [ ! ]SC+ℓ_1≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	5	8	-0.004 -0.012	600	0.3 or Less	0.5 or Less
	8	25~500			3	4	5	6	8							3	4	5								7	8	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8	10						3	4	5	6							8	8	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10	12						4	5	6	8						10	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12						4	5	6	8						11	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12						4	5	6	8	10					13	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12	16					4	5	6	8	10					14	10	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16					4	5	6	8	10	12				16	10	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16	20				4	5	6	8	10	12				17	10	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24			4	5	6	8	10	12	16			22	10	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24	30				6	8	10	12	16	20		27	15	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

[ ! ]Full length L requires Nx2.5+4≤L. [ ! ]When D=P, specify F=B as B dimensions. However, L and F dimensions have manufacturing priority and the B dimension of the product will be F-(Pitchx2).

Coarse Thread Dimensions
M	pitch
3	0.5
4	0.7
5	0.8
6	1.0
8	1.25
10	1.5
12	1.75
16	2.0
20	2.5
24	3.0
30	3.5

Alterations

Linear Shafts-Both Ends Threaded:Related Image

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
SFAZ35-[25-1498/1]-F[2-150/1]-B[0-145/1]-PMS[10,12,14,18]-NSC[8,10,12,14,18]-SC[0-1483/1]
SFAZ40-[40-1498/1]-F[11-150/1]-B[0-145/1]-P[12,16,20,24,30]-N[10,12,16,20,24,30]-SC[0-1478/1]
SFAZ40-[40-1498/1]-F[11-150/1]-B[0-145/1]-P[12,16,20,24,30]-NSC[10,12,14,18]-SC[0-1478/1]
SFAZ40-[40-1498/1]-F[11-150/1]-B[0-145/1]-PMC[12,15,17,20,25,30]-N[10,12,16,20,24,30]-SC[0-1478/1]
SFAZ40-[40-1498/1]-F[11-150/1]-B[0-145/1]-PMC[12,15,17,20,25,30]-NSC[10,12,14,18]-SC[0-1478/1]
SFAZ40-[40-1498/1]-F[11-150/1]-B[0-145/1]-PMS[12,14,18]-N[10,12,16,20,24,30]-SC[0-1478/1]
SFAZ40-[40-1498/1]-F[11-150/1]-B[0-145/1]-PMS[12,14,18]-NSC[10,12,14,18]-SC[0-1478/1]
SFAZ50-[50-1498/1]-F[2-150/1]-B[0-145/1]-P[16,20,24,30]-N[12,16,20,24,30]-SC[0-1478/1]
SFAZ50-[50-1498/1]-F[2-150/1]-B[0-145/1]-P[16,20,24,30]-NSC[12,14,18]-SC[0-1478/1]
SFAZ50-[50-1498/1]-F[2-150/1]-B[0-145/1]-PMC[15,17,20,25,30]-N[12,16,20,24,30]-SC[0-1478/1]
SFAZ50-[50-1498/1]-F[2-150/1]-B[0-145/1]-PMC[15,17,20,25,30]-NSC[12,14,18]-SC[0-1478/1]
SFAZ50-[50-1498/1]-F[2-150/1]-B[0-145/1]-PMS[14,18]-N[12,16,20,24,30]-SC[0-1478/1]
SFAZ50-[50-1498/1]-F[2-150/1]-B[0-145/1]-PMS[14,18]-NSC[12,14,18]-SC[0-1478/1]
SFZH8-[25-500/1]-F[2-40/1]-B[0-38/1]-P[3,4,5,6,8]-N[3,4,5]-H[0-496/1]
SFZH8-[25-500/1]-F[2-40/1]-B[0-38/1]-PMC[3,4,5,6,8]-N[3,4,5]-H[0-496/1]
SFZH10-[25-500/1]-F[2-50/1]-B[0-48/1]-P[4,5,6,8,10]-N[3,4,5,6]-H[0-496/1]
SFZH10-[25-500/1]-F[2-50/1]-B[0-48/1]-P[4,5,6,8,10]-ND6-H[0-496/1]
SFZH10-[25-500/1]-F[2-50/1]-B[0-48/1]-PMC[4,5,6,8,10]-N[3,4,5,6]-H[0-496/1]
SFZH10-[25-500/1]-F[2-50/1]-B[0-48/1]-PMC[4,5,6,8,10]-ND6-H[0-496/1]
SFZH10-[25-500/1]-F[2-50/1]-B[0-48/1]-PMS10-N[3,4,5,6]-H[0-496/1]
SFZH10-[25-500/1]-F[2-50/1]-B[0-48/1]-PMS10-ND6-H[0-496/1]
SFZH12-[25-500/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-N[4,5,6,8]-H[0-496/1]
SFZH12-[25-500/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-ND[6,8]-H[0-496/1]
SFZH12-[25-500/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-NSC8-H[0-496/1]
SFZH12-[25-500/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-N[4,5,6,8]-H[0-496/1]
SFZH12-[25-500/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-ND[6,8]-H[0-496/1]
SFZH12-[25-500/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-NSC8-H[0-496/1]
SFZH12-[25-500/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-N[4,5,6,8]-H[0-496/1]
SFZH12-[25-500/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-ND[6,8]-H[0-496/1]
SFZH12-[25-500/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-NSC8-H[0-496/1]
SFZH13-[25-500/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-N[4,5,6,8]-H[0-496/1]
SFZH13-[25-500/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-ND[6,8]-H[0-496/1]
SFZH13-[25-500/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-NSC8-H[0-496/1]
SFZH13-[25-500/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-N[4,5,6,8]-H[0-496/1]
SFZH13-[25-500/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-ND[6,8]-H[0-496/1]
SFZH13-[25-500/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-NSC8-H[0-496/1]
SFZH13-[25-500/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-N[4,5,6,8]-H[0-496/1]
SFZH13-[25-500/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-ND[6,8]-H[0-496/1]
SFZH13-[25-500/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-NSC8-H[0-496/1]
SFZH15-[25-500/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-N[4,5,6,8,10]-H[0-496/1]
SFZH15-[25-500/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-ND[6,8,10]-H[0-496/1]
SFZH15-[25-500/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-NSC[8,10]-H[0-496/1]
SFZH15-[25-500/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12,15]-N[4,5,6,8,10]-H[0-496/1]
SFZH15-[25-500/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12,15]-ND[6,8,10]-H[0-496/1]
SFZH15-[25-500/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12,15]-NSC[8,10]-H[0-496/1]
SFZH15-[25-500/1]-F[2-60/1]-B[0-58/1]-PMS[10,12,14]-N[4,5,6,8,10]-H[0-496/1]
SFZH15-[25-500/1]-F[2-60/1]-B[0-58/1]-PMS[10,12,14]-ND[6,8,10]-H[0-496/1]
SFZH15-[25-500/1]-F[2-60/1]-B[0-58/1]-PMS[10,12,14]-NSC[8,10]-H[0-496/1]
SFZH16-[25-500/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-N[4,5,6,8,10]-H[0-496/1]
SFZH16-[25-500/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-ND[6,8,10]-H[0-496/1]
SFZH16-[25-500/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-NSC[8,10]-H[0-496/1]
SFZH16-[25-500/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15]-N[4,5,6,8,10]-H[0-496/1]
SFZH16-[25-500/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15]-ND[6,8,10]-H[0-496/1]
SFZH16-[25-500/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15]-NSC[8,10]-H[0-496/1]
SFZH16-[25-500/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14]-N[4,5,6,8,10]-H[0-496/1]
SFZH16-[25-500/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14]-ND[6,8,10]-H[0-496/1]
SFZH16-[25-500/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14]-NSC[8,10]-H[0-496/1]
SFZH18-[25-500/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-N[4,5,6,8,10,12]-H[0-495/1]
SFZH18-[25-500/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-NSC[8,10,12]-H[0-495/1]
SFZH18-[25-500/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15,17]-N[4,5,6,8,10,12]-H[0-495/1]
SFZH18-[25-500/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15,17]-NSC[8,10,12]-H[0-495/1]
SFZH18-[25-500/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14,18]-N[4,5,6,8,10,12]-H[0-495/1]
SFZH18-[25-500/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14,18]-NSC[8,10,12]-H[0-495/1]
SFZH20-[25-500/1]-F[2-100/1]-B[0-98/1]-P[6,8,10,12,16,20]-N[4,5,6,8,10,12]-H[0-495/1]
SFZH20-[25-500/1]-F[2-100/1]-B[0-98/1]-P[6,8,10,12,16,20]-ND[6,8,10,12]-H[0-495/1]
SFZH20-[25-500/1]-F[2-100/1]-B[0-98/1]-P[6,8,10,12,16,20]-NSC[8,10,12,14]-H[0-495/1]
SFZH20-[25-500/1]-F[2-100/1]-B[0-98/1]-PMC[6,8,10,12,15,17,20]-N[4,5,6,8,10,12]-H[0-495/1]
SFZH20-[25-500/1]-F[2-100/1]-B[0-98/1]-PMC[6,8,10,12,15,17,20]-ND[6,8,10,12]-H[0-495/1]
SFZH20-[25-500/1]-F[2-100/1]-B[0-98/1]-PMC[6,8,10,12,15,17,20]-NSC[8,10,12,14]-H[0-495/1]
SFZH20-[25-500/1]-F[2-100/1]-B[0-98/1]-PMS[10,12,14,18]-N[4,5,6,8,10,12]-H[0-495/1]
SFZH20-[25-500/1]-F[2-100/1]-B[0-98/1]-PMS[10,12,14,18]-ND[6,8,10,12]-H[0-495/1]
SFZH20-[25-500/1]-F[2-100/1]-B[0-98/1]-PMS[10,12,14,18]-NSC[8,10,12,14]-H[0-495/1]
SFZH25-[25-500/1]-F[2-120/1]-B[0-117/1]-P[8,10,12,16,20,24]-N[4,5,6,8,10,12,16]-H[0-494/1]
SFZH25-[25-500/1]-F[2-120/1]-B[0-117/1]-P[8,10,12,16,20,24]-ND[6,8,10,12,16]-H[0-494/1]
SFZH25-[25-500/1]-F[2-120/1]-B[0-117/1]-P[8,10,12,16,20,24]-NSC[8,10,12,14,18]-H[0-494/1]
SFZH25-[25-500/1]-F[2-120/1]-B[0-117/1]-PMC[8,10,12,15,17,20,25]-N[4,5,6,8,10,12,16]-H[0-494/1]
SFZH25-[25-500/1]-F[2-120/1]-B[0-117/1]-PMC[8,10,12,15,17,20,25]-ND[6,8,10,12,16]-H[0-494/1]
SFZH25-[25-500/1]-F[2-120/1]-B[0-117/1]-PMC[8,10,12,15,17,20,25]-NSC[8,10,12,14,18]-H[0-494/1]
SFZH25-[25-500/1]-F[2-120/1]-B[0-117/1]-PMS[10,12,14,18]-N[4,5,6,8,10,12,16]-H[0-494/1]
SFZH25-[25-500/1]-F[2-120/1]-B[0-117/1]-PMS[10,12,14,18]-ND[6,8,10,12,16]-H[0-494/1]
SFZH25-[25-500/1]-F[2-120/1]-B[0-117/1]-PMS[10,12,14,18]-NSC[8,10,12,14,18]-H[0-494/1]
SFZH30-[25-500/1]-F[2-150/1]-B[0-147/1]-P[8,10,12,16,20,24,30]-N[6,8,10,12,16,20]-H[0-494/1]
SFZH30-[25-500/1]-F[2-150/1]-B[0-147/1]-P[8,10,12,16,20,24,30]-ND[6,8,10,12,16,20]-H[0-494/1]
SFZH30-[25-500/1]-F[2-150/1]-B[0-147/1]-P[8,10,12,16,20,24,30]-NSC[8,10,12,14,18]-H[0-494/1]
SFZH30-[25-500/1]-F[2-150/1]-B[0-147/1]-PMC[8,10,12,15,17,20,25,30]-N[6,8,10,12,16,20]-H[0-494/1]
SFZH30-[25-500/1]-F[2-150/1]-B[0-147/1]-PMC[8,10,12,15,17,20,25,30]-ND[6,8,10,12,16,20]-H[0-494/1]
SFZH30-[25-500/1]-F[2-150/1]-B[0-147/1]-PMC[8,10,12,15,17,20,25,30]-NSC[8,10,12,14,18]-H[0-494/1]
SFZH30-[25-500/1]-F[2-150/1]-B[0-147/1]-PMS[10,12,14,18]-N[6,8,10,12,16,20]-H[0-494/1]
SFZH30-[25-500/1]-F[2-150/1]-B[0-147/1]-PMS[10,12,14,18]-ND[6,8,10,12,16,20]-H[0-494/1]
SFZH30-[25-500/1]-F[2-150/1]-B[0-147/1]-PMS[10,12,14,18]-NSC[8,10,12,14,18]-H[0-494/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Add Wrench Flats at One Location [SC] (mm)	B (mm)	Change Tapped Thread N to Fine One [NSC] (mm)	F (mm)	Fine Thread [PMC] (mm)	Fine Thread [PMS] (mm)	H (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] (mm)	Threaded (Coarse) [P] (mm)
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 145	8 ～ 18	2 ～ 150	-	10 ～ 18	-	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	40 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	-	11 ～ 150	-	-	-	10 ～ 30	-	12 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	40 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	10 ～ 18	11 ～ 150	-	-	-	-	-	12 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	40 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	-	11 ～ 150	12 ～ 30	-	-	10 ～ 30	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	40 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	10 ～ 18	11 ～ 150	12 ～ 30	-	-	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	40 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	-	11 ～ 150	-	12 ～ 18	-	10 ～ 30	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	40 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	10 ～ 18	11 ～ 150	-	12 ～ 18	-	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	50 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	-	2 ～ 150	-	-	-	12 ～ 30	-	16 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	50 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	12 ～ 18	2 ～ 150	-	-	-	-	-	16 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	50 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	-	2 ～ 150	15 ～ 30	-	-	12 ～ 30	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	50 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	12 ～ 18	2 ～ 150	15 ～ 30	-	-	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	50 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	-	2 ～ 150	-	14 ～ 18	-	12 ～ 30	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	50 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	12 ～ 18	2 ～ 150	-	14 ～ 18	-	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	-	2 ～ 40	-	-	0 ～ 496	3 ～ 5	-	3 ～ 8
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	-	2 ～ 40	3 ～ 8	-	0 ～ 496	3 ～ 5	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	-	2 ～ 50	-	-	0 ～ 496	3 ～ 6	-	4 ～ 10
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	-	2 ～ 50	-	-	0 ～ 496	-	6	4 ～ 10
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	-	2 ～ 50	4 ～ 10	-	0 ～ 496	3 ～ 6	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	-	2 ～ 50	4 ～ 10	-	0 ～ 496	-	6	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	-	2 ～ 50	-	10	0 ～ 496	3 ～ 6	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	-	2 ～ 50	-	10	0 ～ 496	-	6	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	-	-	0 ～ 496	4 ～ 8	-	5 ～ 12
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	-	-	0 ～ 496	-	6 ～ 8	5 ～ 12
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	8	2 ～ 60	-	-	0 ～ 496	-	-	5 ～ 12
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	5 ～ 12	-	0 ～ 496	4 ～ 8	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	5 ～ 12	-	0 ～ 496	-	6 ～ 8	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	8	2 ～ 60	5 ～ 12	-	0 ～ 496	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	-	10 ～ 12	0 ～ 496	4 ～ 8	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	-	10 ～ 12	0 ～ 496	-	6 ～ 8	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	8	2 ～ 60	-	10 ～ 12	0 ～ 496	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	-	-	0 ～ 496	4 ～ 8	-	5 ～ 12
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	-	-	0 ～ 496	-	6 ～ 8	5 ～ 12
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	8	2 ～ 60	-	-	0 ～ 496	-	-	5 ～ 12
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	5 ～ 12	-	0 ～ 496	4 ～ 8	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	5 ～ 12	-	0 ～ 496	-	6 ～ 8	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	8	2 ～ 60	5 ～ 12	-	0 ～ 496	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	-	10 ～ 12	0 ～ 496	4 ～ 8	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	-	10 ～ 12	0 ～ 496	-	6 ～ 8	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	8	2 ～ 60	-	10 ～ 12	0 ～ 496	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	-	-	0 ～ 496	4 ～ 10	-	5 ～ 12
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	-	-	0 ～ 496	-	6 ～ 10	5 ～ 12
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	8 ～ 10	2 ～ 60	-	-	0 ～ 496	-	-	5 ～ 12
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	5 ～ 15	-	0 ～ 496	4 ～ 10	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	5 ～ 15	-	0 ～ 496	-	6 ～ 10	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	8 ～ 10	2 ～ 60	5 ～ 15	-	0 ～ 496	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	-	10 ～ 14	0 ～ 496	4 ～ 10	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	-	2 ～ 60	-	10 ～ 14	0 ～ 496	-	6 ～ 10	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	8 ～ 10	2 ～ 60	-	10 ～ 14	0 ～ 496	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	-	2 ～ 80	-	-	0 ～ 496	4 ～ 10	-	5 ～ 16
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	-	2 ～ 80	-	-	0 ～ 496	-	6 ～ 10	5 ～ 16
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	8 ～ 10	2 ～ 80	-	-	0 ～ 496	-	-	5 ～ 16
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	-	2 ～ 80	5 ～ 15	-	0 ～ 496	4 ～ 10	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	-	2 ～ 80	5 ～ 15	-	0 ～ 496	-	6 ～ 10	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	8 ～ 10	2 ～ 80	5 ～ 15	-	0 ～ 496	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	-	2 ～ 80	-	10 ～ 14	0 ～ 496	4 ～ 10	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	-	2 ～ 80	-	10 ～ 14	0 ～ 496	-	6 ～ 10	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	8 ～ 10	2 ～ 80	-	10 ～ 14	0 ～ 496	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	-	2 ～ 80	-	-	0 ～ 495	4 ～ 12	-	5 ～ 16
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	8 ～ 12	2 ～ 80	-	-	0 ～ 495	-	-	5 ～ 16
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	-	2 ～ 80	5 ～ 17	-	0 ～ 495	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	8 ～ 12	2 ～ 80	5 ～ 17	-	0 ～ 495	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	-	2 ～ 80	-	10 ～ 18	0 ～ 495	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	8 ～ 12	2 ～ 80	-	10 ～ 18	0 ～ 495	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 98	-	2 ～ 100	-	-	0 ～ 495	4 ～ 12	-	6 ～ 20
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 98	-	2 ～ 100	-	-	0 ～ 495	-	6 ～ 12	6 ～ 20
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 98	8 ～ 14	2 ～ 100	-	-	0 ～ 495	-	-	6 ～ 20
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 98	-	2 ～ 100	6 ～ 20	-	0 ～ 495	4 ～ 12	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 98	-	2 ～ 100	6 ～ 20	-	0 ～ 495	-	6 ～ 12	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 98	8 ～ 14	2 ～ 100	6 ～ 20	-	0 ～ 495	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 98	-	2 ～ 100	-	10 ～ 18	0 ～ 495	4 ～ 12	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 98	-	2 ～ 100	-	10 ～ 18	0 ～ 495	-	6 ～ 12	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 98	8 ～ 14	2 ～ 100	-	10 ～ 18	0 ～ 495	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	-	2 ～ 120	-	-	0 ～ 494	4 ～ 16	-	8 ～ 24
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	-	2 ～ 120	-	-	0 ～ 494	-	6 ～ 16	8 ～ 24
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	8 ～ 18	2 ～ 120	-	-	0 ～ 494	-	-	8 ～ 24
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	-	2 ～ 120	8 ～ 25	-	0 ～ 494	4 ～ 16	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	-	2 ～ 120	8 ～ 25	-	0 ～ 494	-	6 ～ 16	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	8 ～ 18	2 ～ 120	8 ～ 25	-	0 ～ 494	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	-	2 ～ 120	-	10 ～ 18	0 ～ 494	4 ～ 16	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	-	2 ～ 120	-	10 ～ 18	0 ～ 494	-	6 ～ 16	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	8 ～ 18	2 ～ 120	-	10 ～ 18	0 ～ 494	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 147	-	2 ～ 150	-	-	0 ～ 494	6 ～ 20	-	8 ～ 30
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 147	-	2 ～ 150	-	-	0 ～ 494	-	6 ～ 20	8 ～ 30
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 147	8 ～ 18	2 ～ 150	-	-	0 ～ 494	-	-	8 ～ 30
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 147	-	2 ～ 150	8 ～ 30	-	0 ～ 494	6 ～ 20	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 147	-	2 ～ 150	8 ～ 30	-	0 ～ 494	-	6 ～ 20	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 147	8 ～ 18	2 ～ 150	8 ～ 30	-	0 ～ 494	-	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 147	-	2 ～ 150	-	10 ～ 18	0 ～ 494	6 ～ 20	-	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 147	-	2 ～ 150	-	10 ～ 18	0 ～ 494	-	6 ～ 20	-
-	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 147	8 ～ 18	2 ～ 150	-	10 ～ 18	0 ～ 494	-	-	-

Example

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	Tapped
Shaft End Perpendicularity	Perpendicularity (0.2)

Configure

1,454 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
6

8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1498/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Add Wrench Flats at One Location [SC](mm)
[0-1483/1mm Unit(s)]
Clear
B(mm)
[0-150/1mm Unit(s)]
Clear
Change Tapped Thread N to Fine One [NSC](mm)
8

10

12

14

18
Clear
F(mm)
[2-150/1mm Unit(s)]
Clear
Fine Thread [PMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
Fine Thread [PMS](mm)
10

12

14

16

18
Clear
H(mm)
[0-496/1mm Unit(s)]
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)
6

8

10

12

16

20
Clear
Threaded (Coarse) [P](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
type
- PSFAZ
- PSFZH
- PSFZU
- PSGGZ
- PSGZH
- PSSFAZ
- PSSFZH
- PSSFZU
- PSSGGZ
- RSFAZ
- RSFZH
- SFAZ
- SFZH
- SFZU
- SSFAZ
- SSFZH
- SSFZU
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

5 Day(s) or Less

6 Day(s) or Less

11 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(65) 6733 7211 / FAX：(65) 6733 0211; 9:00am - 6:00pm (Monday - Friday); Technical Inquiry

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

Linear Shafts-One Ends Threaded (Part Numbers)

Specifications

Alterations

Part Number

Example

Basic Information

Configure

Specification/Dimensions

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

Add Wrench Flats at One Location [SC](mm)

B(mm)

Change Tapped Thread N to Fine One [NSC](mm)

F(mm)

Fine Thread [PMC](mm)

Fine Thread [PMS](mm)

H(mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)

Threaded (Coarse) [P](mm)

type

CAD

Days to Ship

Specify Alterations

Tech Support

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)