(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Categories

Search by Application

Brands

  • MISUMI TECHNICAL LIBRARY
  • Mold EX Press
  • Need a copy of MISUMI Catalog?
Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
Quote / Order

Part Number Checker

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

  • How can we improve?

    How can we improve?

    Feedback
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    Thank you for your time.
    Your feedback is essential for our continuous improvement
    Privacy Policy

    Thank you for your cooperation.

    Thank you for your time.
    Your feedback is essential for our continuous improvement
    Please use the inquiry form.

    Privacy Policy

Ball Splines - Both Ends Stepped and Threaded

Ball Splines - Both Ends Stepped and Threaded

Click this image to zoom it.

Move the mouse over the image to zoom

MISUMI

MISUMI

A ball spline with stepped male threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

(i)Caution

  • Please check the content on our website as the PDF does not contain the most up-to-date information.

PDFP.1-355-2014

Part Number

Configured Part Number is shown.

 
Both Ends Stepped and ThreadedSpline Shafts[ M ]SUJ2 Equivalent Nut
[ M ]SCM415 Equivalent[ H ]Hardness: 58HRC ~		Spline Shaft, Nut[ M ]Material: SUS440C Equivalent[ H ]Hardness: 55HRC ~
Nut 1 pc.Nut 1 pc.
With Round Flange NutBSYMBSYMS
With Compact Flange NutBSYN-
With Straight NutBSYSBSYSS

Specifications

Part Number-L-F-E-B-S-P-Q-M-N
BSYS8
BSYS8G
BSYS8L		-
-
-		250
250
250		-
-
-		F20
F20
F20		-
-
-		E20
E20
E20		-
-
-		B8
B8
B8		-
-
-		S8
S8
S8		-
-
-		P6
P6
P6		-
-
-		Q6
Q6
Q6		-
-
-		M6
M6
M6		-
-
-		N6
N6
N6
Alternative grease types available. For Days to Ship, Price and Performance, see >> P.340
■Spline Shafts
Part Number1mm IncrementP, Q
Selection		M (Coarse) / N (Coarse) Selection
(M≤P, N≤Q)		D(Y)Mass (kg/m)
TypeNo.LF, EB, S1-Nut Type
1-Nut Typemin~max
BSYM
BSYN
BSYS
BSYMS
BSYSS		*660~400(190)When P, Q=3
4≤F, E≤9
When P, Q=4
4≤F, E≤16
When P, Q≥5
4≤F, E≤P, Qx5
[ ! ]F, E≥B, S+2		When M, N=3
2≤B, S≤M, Nx3
When M, N=4
2≤B, S≤M, Nx4
When M, N≥5
2≤B, S≤M, Nx5
[ ! ]B • S≥Pitchx3+ℓ
[ ! ]For SUS materials,M, N≤B, S≤M, Nx3		345         345       652~392(182)0.23
*860~400(190) 456         456      852~392(182)0.39
*1060~600(390) 4568        4568     10.452~592(382)0.65
*1360~600(390)  56810        56810    13.452~592(382)1.11
*1670~600(390)  568101213       681012   16.662~592(382)1.65
2080~700    81012131516     68101216  20.672~6922.57
2590~900    8101213151620    6810121620 25.882~8924.04
30100~1150     10121315162025    8101216202430.892~11425.85
[ ! ]For BSYMS and BSYSS, only * marked sizes are available, and the Max. L and Y dimensions are in ( ).
[ ! ]For BSYN, only No. 6, 8 and 10 are available.
■Round Flange Nuts, Compact Flange Nuts
No.D
(h6)		LDfHP.C.D.d1d2hWdBBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)
Dynamic Ct
(N • m)		Static C0t
(N • m)		Dynamic C
(kN)		Static C0
(kN)		M01
(N • m)		M02
(N • m)
61425306223.563.16.51.5183.871.22.15360.03
8163224214.88.71.22.15360.04
102140(33)42(41)6(8)32(30)4.584.4(5.3)14(8.5)2519(11)34(21)3.8(2.4)6.9(4.3)26(15)181(102)0.09
132444(36)44(45)7(8)33(34)15(10)-28(20)52(37)4.6(3.3)8.3(5.9)36(22)251(148)0.11
163150517404.41851936.211.1563860.2
203563589455.59.55.422.52851548.515.3836110.3
254271655226.519334815.427.717312480.4
3047807510606.6116.5302.527249018.533.321215810.57
[ ! ]Dimensions in ( ) are for SUS440C Equivalent. [ ! ]Allowable static moment M01 is a value measured when a single nut is used, and M02 is a value measured when two nuts are used.
■Straight Nuts
No.D
(h6)		Lb t
(+0.05(
0		dαBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)		Dimensions of Key (Included)
ToleranceDynamic Ct
(N • m)		Static C0t
(N • m)		Dynamic C
(kN)		Static C0
(kN)		M01
(N • m)		M02
(N • m)		B h L1R
ToleranceTolerance
614252.5+0.014
0		1.21.515°3.871.22.15360.0122.5+0.016
+0.006		2.50
-0.025		10.51.25
81625°4.88.71.22.15360.01310.5
102140(33)31.5-19(11)34(21)3.8(2.4)6.9(4.3)26(15)181(102)0.063317(14)1.5
132444(36)28(20)52(37)4.6(3.3)8.3(5.9)36(22)251(148)0.0717(14)
1631503.5+0.018
0		251936.211.1563860.153.5+0.024
+0.012		3.50
-0.030		181.75
20356342.52851548.515.3836110.244292
25427119334815.427.717312480.2933
3047802.527249018.533.321215810.3742
[ ! ]Dimensions in ( ) are for SUS440C Equivalent. [ ! ]Allowable static moment M01 is a value measured when a single nut is used, and M02 is a value measured when two nuts are used.

Alterations

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
Part Number
BSYM6-[60-400/1]-F[4-25/1]-E[4-25/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYM6G-[60-400/1]-F[4-9/1]-E[4-9/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYM6L-[60-400/1]-F[4-9/1]-E[4-9/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYM8-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[4,​5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYM8G-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYM8L-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYM10-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYM10G-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYM10L-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYM13-[60-600/1]-F[4-50/1]-E[4-50/1]-B[2-50/1]-S[2-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYM13G-[60-600/1]-F[4-50/1]-E[4-50/1]-B[2-50/1]-S[2-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYM13L-[60-600/1]-F[4-50/1]-E[4-50/1]-B[2-50/1]-S[2-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYM16-[70-600/1]-F[4-65/1]-E[4-65/1]-B[2-60/1]-S[2-60/1]-P[5,​6,​8,​10,​12,​13]-Q[5,​6,​8,​10,​12,​13]-M[6,​8,​10,​12]-N[6,​8,​10,​12]
BSYM16G-[70-600/1]-F[4-65/1]-E[4-65/1]-B[2-60/1]-S[2-60/1]-P[5,​6,​8,​10,​12,​13]-Q[5,​6,​8,​10,​12,​13]-M[6,​8,​10,​12]-N[6,​8,​10,​12]
BSYM16L-[70-600/1]-F[4-65/1]-E[4-65/1]-B[2-60/1]-S[2-60/1]-P[5,​6,​8,​10,​12,​13]-Q[5,​6,​8,​10,​12,​13]-M[6,​8,​10,​12]-N[6,​8,​10,​12]
BSYM20-[80-700/1]-F[4-80/1]-E[4-80/1]-B[2-90/1]-S[2-90/1]-P[8,​10,​12,​13,​15,​16]-Q[8,​10,​12,​13,​15,​16]-M[6,​8,​10,​12,​16]-N[6,​8,​10,​12,​16]
BSYM20G-[80-700/1]-F[4-80/1]-E[4-80/1]-B[2-90/1]-S[2-90/1]-P[8,​10,​12,​13,​15,​16]-Q[8,​10,​12,​13,​15,​16]-M[6,​8,​10,​12,​16]-N[6,​8,​10,​12,​16]
BSYM20L-[80-700/1]-F[4-80/1]-E[4-80/1]-B[2-90/1]-S[2-90/1]-P[8,​10,​12,​13,​15,​16]-Q[8,​10,​12,​13,​15,​16]-M[6,​8,​10,​12,​16]-N[6,​8,​10,​12,​16]
BSYM25-[90-900/1]-F[4-100/1]-E[4-100/1]-B[2-100/1]-S[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]-Q[8,​10,​12,​13,​15,​16,​20]-M[6,​8,​10,​12,​16,​20]-N[6,​8,​10,​12,​16,​20]
BSYM25G-[90-900/1]-F[4-100/1]-E[4-100/1]-B[2-100/1]-S[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]-Q[8,​10,​12,​13,​15,​16,​20]-M[6,​8,​10,​12,​16,​20]-N[6,​8,​10,​12,​16,​20]
BSYM25L-[90-900/1]-F[4-100/1]-E[4-100/1]-B[2-100/1]-S[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]-Q[8,​10,​12,​13,​15,​16,​20]-M[6,​8,​10,​12,​16,​20]-N[6,​8,​10,​12,​16,​20]
BSYM30-[100-1150/1]-F[4-125/1]-E[4-125/1]-B[2-120/1]-S[2-120/1]-P[10,​12,​13,​15,​16,​20,​25]-Q[10,​12,​13,​15,​16,​20,​25]-M[8,​10,​12,​16,​20,​24]-N[8,​10,​12,​16,​20,​24]
BSYM30G-[100-1150/1]-F[4-125/1]-E[4-125/1]-B[2-120/1]-S[2-120/1]-P[10,​12,​13,​15,​16,​20,​25]-Q[10,​12,​13,​15,​16,​20,​25]-M[8,​10,​12,​16,​20,​24]-N[8,​10,​12,​16,​20,​24]
BSYM30L-[100-1150/1]-F[4-125/1]-E[4-125/1]-B[2-120/1]-S[2-120/1]-P[10,​12,​13,​15,​16,​20,​25]-Q[10,​12,​13,​15,​16,​20,​25]-M[8,​10,​12,​16,​20,​24]-N[8,​10,​12,​16,​20,​24]
BSYMS6-[60-190/1]-F[4-9/1]-E[4-9/1]-B[3-15/1]-S[3-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYMS6G-[60-190/1]-F[4-9/1]-E[4-9/1]-B[3-15/1]-S[3-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYMS6L-[60-190/1]-F[4-9/1]-E[4-9/1]-B[3-15/1]-S[3-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYMS8-[60-190/1]-F[4-30/1]-E[4-30/1]-B[4-18/1]-S[4-30/1]-P[4,​5,​6]-Q[4,​5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYMS8G-[60-190/1]-F[4-30/1]-E[4-30/1]-B[4-18/1]-S[4-30/1]-P[4,​5,​6]-Q[4,​5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYMS8L-[60-190/1]-F[4-30/1]-E[4-30/1]-B[4-18/1]-S[4-30/1]-P[4,​5,​6]-Q[4,​5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYMS10-[60-390/1]-F[4-40/1]-E[4-40/1]-B[4-24/1]-S[4-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYMS10G-[60-390/1]-F[4-40/1]-E[4-40/1]-B[4-24/1]-S[4-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYMS10L-[60-390/1]-F[4-40/1]-E[4-40/1]-B[4-24/1]-S[4-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYMS13-[60-390/1]-F[4-50/1]-E[4-50/1]-B[5-30/1]-S[5-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYMS13G-[60-390/1]-F[4-50/1]-E[4-50/1]-B[5-30/1]-S[5-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYMS13L-[60-390/1]-F[4-50/1]-E[4-50/1]-B[5-30/1]-S[5-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYMS16-[70-390/1]-F[4-65/1]-E[4-65/1]-B[5-39/1]-S[5-60/1]-P[5,​6,​8,​10,​12,​13]-Q[5,​6,​8,​10,​12,​13]-M[6,​8,​10,​12]-N[6,​8,​10,​12]
BSYMS16G-[70-390/1]-F[4-65/1]-E[4-65/1]-B[5-39/1]-S[5-60/1]-P[5,​6,​8,​10,​12,​13]-Q[5,​6,​8,​10,​12,​13]-M[6,​8,​10,​12]-N[6,​8,​10,​12]
BSYMS16L-[70-390/1]-F[4-65/1]-E[4-65/1]-B[5-39/1]-S[5-60/1]-P[5,​6,​8,​10,​12,​13]-Q[5,​6,​8,​10,​12,​13]-M[6,​8,​10,​12]-N[6,​8,​10,​12]
BSYN6-[60-400/1]-F[4-30/1]-E[4-16/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYN6G-[60-400/1]-F[4-9/1]-E[4-9/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYN6L-[60-400/1]-F[4-9/1]-E[4-9/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYN8-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYN8G-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYN8L-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYN10-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYN10G-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYN10L-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSNut Type Shaft Outer Dia. D
(Ø) 		Nut Overall Length
(mm) 		Nut O.D.
(Ø) 		Shaft material Shaft Overall Length L
(mm) 		Basic Load Rating: Dynamic Load
(N) 		Allowable Torque
(N•m) 		Nut Material Grease B
(mm) 		E
(mm) 		F
(mm) 		M
(mm) 		N
(mm) 		P
(mm) 		Q
(mm) 		S
(mm)

-

1 Piece(s) 9 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ～ 40012003.8SCM415 EquivalentStandard (S2)2 ～ 254 ～ 254 ～ 253 ～ 53 ～ 53 ～ 53 ～ 52 ～ 25

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ～ 40012003.8SCM415 EquivalentLG22 ～ 254 ～ 94 ～ 93 ～ 53 ～ 53 ～ 53 ～ 52 ～ 25

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ～ 40012003.8SCM415 EquivalentET-100K2 ～ 254 ～ 94 ～ 93 ～ 53 ～ 53 ～ 53 ～ 52 ～ 25

-

1 Piece(s) 9 Day(s) or more 10[Flanged Type] Round Flange82516SUJ2 Equivalent60 ～ 40012004.8SCM415 EquivalentStandard (S2)2 ～ 304 ～ 304 ～ 304 ～ 64 ～ 64 ～ 64 ～ 62 ～ 30

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange82516SUJ2 Equivalent60 ～ 40012004.8SCM415 EquivalentLG22 ～ 304 ～ 304 ～ 304 ～ 64 ～ 64 ～ 65 ～ 62 ～ 30

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange82516SUJ2 Equivalent60 ～ 40012004.8SCM415 EquivalentET-100K2 ～ 304 ～ 304 ～ 304 ～ 64 ～ 64 ～ 65 ～ 62 ～ 30

-

1 Piece(s) 9 Day(s) or more 10[Flanged Type] Round Flange10.44021SUJ2 Equivalent60 ～ 600380019SCM415 EquivalentStandard (S2)2 ～ 404 ～ 404 ～ 404 ～ 84 ～ 84 ～ 85 ～ 82 ～ 40

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange10.44021SUJ2 Equivalent60 ～ 600380019SCM415 EquivalentLG22 ～ 404 ～ 404 ～ 404 ～ 84 ～ 84 ～ 85 ～ 82 ～ 40

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange10.44021SUJ2 Equivalent60 ～ 600380019SCM415 EquivalentET-100K2 ～ 404 ～ 404 ～ 404 ～ 84 ～ 84 ～ 85 ～ 82 ～ 40

-

1 Piece(s) 9 Day(s) or more 10[Flanged Type] Round Flange13.44424SUJ2 Equivalent60 ～ 600460028SCM415 EquivalentStandard (S2)2 ～ 504 ～ 504 ～ 505 ～ 105 ～ 105 ～ 105 ～ 102 ～ 50

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange13.44424SUJ2 Equivalent60 ～ 600460028SCM415 EquivalentLG22 ～ 504 ～ 504 ～ 505 ～ 105 ～ 105 ～ 105 ～ 102 ～ 50

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange13.44424SUJ2 Equivalent60 ～ 600460028SCM415 EquivalentET-100K2 ～ 504 ～ 504 ～ 505 ～ 105 ～ 105 ～ 105 ～ 102 ～ 50

-

1 Piece(s) 9 Day(s) or more 10[Flanged Type] Round Flange16.65031SUJ2 Equivalent70 ～ 600620051SCM415 EquivalentStandard (S2)2 ～ 604 ～ 654 ～ 656 ～ 126 ～ 125 ～ 135 ～ 132 ～ 60

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange16.65031SUJ2 Equivalent70 ～ 600620051SCM415 EquivalentLG22 ～ 604 ～ 654 ～ 656 ～ 126 ～ 125 ～ 135 ～ 132 ～ 60

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange16.65031SUJ2 Equivalent70 ～ 600620051SCM415 EquivalentET-100K2 ～ 604 ～ 654 ～ 656 ～ 126 ～ 125 ～ 135 ～ 132 ～ 60

-

1 Piece(s) 9 Day(s) or more 10[Flanged Type] Round Flange20.66335SUJ2 Equivalent80 ～ 700850085SCM415 EquivalentStandard (S2)2 ～ 904 ～ 804 ～ 806 ～ 166 ～ 168 ～ 168 ～ 162 ～ 90

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange20.66335SUJ2 Equivalent80 ～ 700850085SCM415 EquivalentLG22 ～ 904 ～ 804 ～ 806 ～ 166 ～ 168 ～ 168 ～ 162 ～ 90

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange20.66335SUJ2 Equivalent80 ～ 700850085SCM415 EquivalentET-100K2 ～ 904 ～ 804 ～ 806 ～ 166 ～ 168 ～ 168 ～ 162 ～ 90

-

1 Piece(s) 9 Day(s) or more 10[Flanged Type] Round Flange25.87142SUJ2 Equivalent90 ～ 90015400193SCM415 EquivalentStandard (S2)2 ～ 1004 ～ 1004 ～ 1006 ～ 206 ～ 208 ～ 208 ～ 202 ～ 100

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange25.87142SUJ2 Equivalent90 ～ 90015400193SCM415 EquivalentLG22 ～ 1004 ～ 1004 ～ 1006 ～ 206 ～ 208 ～ 208 ～ 202 ～ 100

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange25.87142SUJ2 Equivalent90 ～ 90015400193SCM415 EquivalentET-100K2 ～ 1004 ～ 1004 ～ 1006 ～ 206 ～ 208 ～ 208 ～ 202 ～ 100

-

1 Piece(s) 9 Day(s) or more 10[Flanged Type] Round Flange30.88047SUJ2 Equivalent100 ～ 115018500272SCM415 EquivalentStandard (S2)2 ～ 1204 ～ 1254 ～ 1258 ～ 248 ～ 2410 ～ 2510 ～ 252 ～ 120

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange30.88047SUJ2 Equivalent100 ～ 115018500272SCM415 EquivalentLG22 ～ 1204 ～ 1254 ～ 1258 ～ 248 ～ 2410 ～ 2510 ～ 252 ～ 120

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Round Flange30.88047SUJ2 Equivalent100 ～ 115018500272SCM415 EquivalentET-100K2 ～ 1204 ～ 1254 ～ 1258 ～ 248 ～ 2410 ～ 2510 ～ 252 ～ 120

-

1 Piece(s) 8 Day(s) or more 10[Flanged Type] Round Flange62514SUS440C Equivalent60 ～ 19012003.8SUS440C EquivalentStandard (S2)3 ～ 154 ～ 94 ～ 93 ～ 53 ～ 53 ～ 53 ～ 53 ～ 25

-

1 Piece(s) 10 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ～ 19012003.8SCM415 EquivalentLG23 ～ 154 ～ 94 ～ 93 ～ 53 ～ 53 ～ 53 ～ 53 ～ 25

-

1 Piece(s) 10 Day(s) or more 10[Flanged Type] Round Flange62514SUS440C Equivalent60 ～ 19012003.8SUS440C EquivalentET-100K3 ～ 154 ～ 94 ～ 93 ～ 53 ～ 53 ～ 53 ～ 53 ～ 25

-

1 Piece(s) 8 Day(s) or more 10[Flanged Type] Round Flange82516SUS440C Equivalent60 ～ 19012004.8SUS440C EquivalentStandard (S2)4 ～ 184 ～ 304 ～ 304 ～ 64 ～ 64 ～ 64 ～ 64 ～ 30

-

1 Piece(s) 10 Day(s) or more 10[Flanged Type] Round Flange82516SUJ2 Equivalent60 ～ 19012004.8SCM415 EquivalentLG24 ～ 184 ～ 304 ～ 304 ～ 64 ～ 64 ～ 64 ～ 64 ～ 30

-

1 Piece(s) 10 Day(s) or more 10[Flanged Type] Round Flange82516SUS440C Equivalent60 ～ 19012004.8SUS440C EquivalentET-100K4 ～ 184 ～ 304 ～ 304 ～ 64 ～ 64 ～ 64 ～ 64 ～ 30

-

1 Piece(s) 8 Day(s) or more 10[Flanged Type] Round Flange10.43321SUS440C Equivalent60 ～ 390240011SUS440C EquivalentStandard (S2)4 ～ 244 ～ 404 ～ 404 ～ 84 ～ 84 ～ 85 ～ 84 ～ 40

-

1 Piece(s) 10 Day(s) or more 10[Flanged Type] Round Flange10.44021SUJ2 Equivalent60 ～ 390380019SCM415 EquivalentLG24 ～ 244 ～ 404 ～ 404 ～ 84 ～ 84 ～ 85 ～ 84 ～ 40

-

1 Piece(s) 10 Day(s) or more 10[Flanged Type] Round Flange10.43321SUS440C Equivalent60 ～ 390240011SUS440C EquivalentET-100K4 ～ 244 ～ 404 ～ 404 ～ 84 ～ 84 ～ 85 ～ 84 ～ 40

-

1 Piece(s) 8 Day(s) or more 10[Flanged Type] Round Flange13.43624SUS440C Equivalent60 ～ 390330020SUS440C EquivalentStandard (S2)5 ～ 304 ～ 504 ～ 505 ～ 105 ～ 105 ～ 105 ～ 105 ～ 50

-

1 Piece(s) 10 Day(s) or more 10[Flanged Type] Round Flange13.43624SUS440C Equivalent60 ～ 390330020SUS440C EquivalentLG25 ～ 304 ～ 504 ～ 505 ～ 105 ～ 105 ～ 105 ～ 105 ～ 50

-

1 Piece(s) 10 Day(s) or more 10[Flanged Type] Round Flange13.43624SUS440C Equivalent60 ～ 390330020SUS440C EquivalentET-100K5 ～ 304 ～ 504 ～ 505 ～ 105 ～ 105 ～ 105 ～ 105 ～ 50

-

1 Piece(s) 8 Day(s) or more 10[Flanged Type] Round Flange16.65031SUS440C Equivalent70 ～ 390620051SUS440C EquivalentStandard (S2)5 ～ 394 ～ 654 ～ 656 ～ 126 ～ 125 ～ 135 ～ 135 ～ 60

-

1 Piece(s) 10 Day(s) or more 10[Flanged Type] Round Flange16.65031SUJ2 Equivalent70 ～ 390620051SCM415 EquivalentLG25 ～ 394 ～ 654 ～ 656 ～ 126 ～ 125 ～ 135 ～ 135 ～ 60

-

1 Piece(s) 10 Day(s) or more 10[Flanged Type] Round Flange16.65031SUS440C Equivalent70 ～ 390620051SUS440C EquivalentET-100K5 ～ 394 ～ 654 ～ 656 ～ 126 ～ 125 ～ 135 ～ 135 ～ 60

-

1 Piece(s) 9 Day(s) or more 10[Flanged Type] Compact Flange62514SUJ2 Equivalent60 ～ 40012003.8SCM415 EquivalentStandard (S2)2 ～ 254 ～ 164 ～ 303 ～ 53 ～ 53 ～ 53 ～ 52 ～ 25

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Compact Flange62514SUJ2 Equivalent60 ～ 40012003.8SCM415 EquivalentLG22 ～ 254 ～ 94 ～ 93 ～ 53 ～ 53 ～ 53 ～ 52 ～ 25

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Compact Flange62514SUJ2 Equivalent60 ～ 40012003.8SCM415 EquivalentET-100K2 ～ 254 ～ 94 ～ 93 ～ 53 ～ 53 ～ 53 ～ 52 ～ 25

-

1 Piece(s) 9 Day(s) or more 10[Flanged Type] Compact Flange82516SUJ2 Equivalent60 ～ 40012004.8SCM415 EquivalentStandard (S2)2 ～ 304 ～ 304 ～ 304 ～ 64 ～ 64 ～ 65 ～ 62 ～ 30

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Compact Flange82516SUJ2 Equivalent60 ～ 40012004.8SCM415 EquivalentLG22 ～ 304 ～ 304 ～ 304 ～ 64 ～ 64 ～ 65 ～ 62 ～ 30

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Compact Flange82516SUJ2 Equivalent60 ～ 40012004.8SCM415 EquivalentET-100K2 ～ 304 ～ 304 ～ 304 ～ 64 ～ 64 ～ 65 ～ 62 ～ 30

-

1 Piece(s) 9 Day(s) or more 10[Flanged Type] Compact Flange10.44021SUJ2 Equivalent60 ～ 600380019SCM415 EquivalentStandard (S2)2 ～ 404 ～ 404 ～ 404 ～ 84 ～ 84 ～ 85 ～ 82 ～ 40

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Compact Flange10.44021SUJ2 Equivalent60 ～ 600380019SCM415 EquivalentLG22 ～ 404 ～ 404 ～ 404 ～ 84 ～ 84 ～ 85 ～ 82 ～ 40

-

1 Piece(s) 11 Day(s) or more 10[Flanged Type] Compact Flange10.44021SUJ2 Equivalent60 ～ 600380019SCM415 EquivalentET-100K2 ～ 404 ～ 404 ～ 404 ～ 84 ～ 84 ～ 85 ～ 82 ～ 40

Loading...

  1. 1

More Information

 

Basic Information

Type Solid Shaft Nut Length Standard Preload Standard
Accuracy Grade Standard Grade End Shape (Left) Stepped and Threaded End Shape (Right) Stepped and Threaded
Torque Middle Torque Ball Recirculating Type Single

Configure

Clear All

48 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Shaft Outer Dia. D(Ø)

    • 6
    • 8
    • 10.4
    • 13.4
    • 16.6
    • 20.6
    • 25.8
    • 30.8

    Clear

  • Nut Overall Length(mm)

    • 25
    • 33
    • 36
    • 40
    • 44
    • 50
    • 63
    • 71
    • 80

    Clear

  • Nut O.D.(Ø)

    • 14
    • 16
    • 21
    • 24
    • 31
    • 35
    • 42
    • 47

    Clear

  • Shaft material

    • SUS440C Equivalent
    • SUJ2 Equivalent

    Clear

  • Shaft Overall Length L(mm)

     [60-1150/1mm Unit(s)]

    Clear

  • Nut Material

    • SCM415 Equivalent
    • SUS440C Equivalent

    Clear

  • Grease

    • ET-100K
    • LG2
    • Standard (S2)

    Clear

  • B(mm)

     [2-120/1mm Unit(s)]

    Clear

  • E(mm)

     [4-125/1mm Unit(s)]

    Clear

  • F(mm)

     [4-125/1mm Unit(s)]

    Clear

  • M(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24

    Clear

  • N(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24

    Clear

  • P(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 20
    • 25

    Clear

  • Q(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 20
    • 25

    Clear

  • S(mm)

     [2-120/1mm Unit(s)]

    Clear

  • type

    • BSYM
    • BSYMS
    • BSYN
    • BSYS
    • BSYSS

    Clear

  • Nut Type

    • Straight
    • Flanged Type
      • Compact Flange
      • Round Flange

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 8 Day(s) or Less
    • 9 Day(s) or Less
    • 10 Day(s) or Less
    • 11 Day(s) or Less

    Clear

Specify Alterations

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel：(65) 6733 7211 / FAX：(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
Technical Inquiry

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)

  • Tel: (65) 6733 7211
  • Fax: (65) 6733 0211
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.