(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Ball Splines - One End Stepped and Threaded, One End Tapped (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

MISUMI

A ball spline with a stepped male thread on one end and a female thread on the other end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

(i)Caution

Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

One End Stepped and Threaded, One End Tapped	Spline Shafts[ M ]SUJ2 Equivalent Nut [ M ]SCM415 Equivalent[ H ]Hardness : 58HRC ~		Spline Shaft, Nut[ M ]Material: SUS440C Equivalent[ H ]Hardness: 55HRC ~
One End Stepped and Threaded, One End Tapped	Nut 1 pc.	Nut 2 pcs.	Nut 1 pc.
With Round Flange Nut	BSBM	BSB2M	BSBMS
With Compact Flange Nut	BSBN	BSB2N	-
With Straight Nut	BSBS	BSB2S	BSBSS

Specifications

Part Number	-	L	-	F	-	B	-	P	-	M	-	N
BSB2N10 BSB2N10G BSB2N10L	- - -	300 300 300	- - -	F20 F20 F20	- - -	B10 B10 B10	- - -	P5 P5 P5	- - -	M5 M5 M5	- - -	N3 N3 N3

Alternative grease types available.
For Days to Ship, Price and Performance, see >> P.340

■Spline Shafts

Part Number		1mm Increment				P Selection												M (Coarse) Selection (M≤P)										N (Coarse) Selection								D	(Y)		Mass (kg/m)
Type	No.	L		F	B																																1-Nut Type	2-Nut Type
Type	No.	1-Nut Type	2-Nut Type	F	B																																min~max	min~max
BSBM BSBN BSBS BSB2M BSB2N BSB2S BSBMS BSBSS	*6	60~400(190)	60~400	When P=3 4≤F≤9 When P=4 4≤F≤16 When P≥5 4≤F≤Px5 [ ! ]F≥B+2	When M=3 2≤B≤9 When M=4 2≤B≤16 When M≥5 2≤B≤Mx5 [ ! ]B≥Pitchx3+ℓ [ ! ]For SUS materials,M≤B≤Mx3	3	4	5										3	4	5								3								6	56~396(186)	56~396	0.23
	*8	60~400(190)	60~600				4	5	6										4	5	6							3	4							8	56~396(186)	56~596	0.39
	*10	60~600(390)	90~600				4	5	6	8									4	5	6	8						3	4	5						10.4	56~596(386)	86~596	0.65
	*13	60~600(390)	100~600					5	6	8	10									5	6	8	10						4	5	6					13.4	56~596(386)	96~596	1.11
	*16	70~600(390)	110~600					5	6	8	10	12	13								6	8	10	12					4	5	6	8				16.6	66~596(386)	106~596	1.65
	20	80~ 700	130~700							8	10	12	13	15	16						6	8	10	12	16				4	5	6	8	10			20.6	76~696	126~696	2.57
	25	90~ 900	150~900							8	10	12	13	15	16	20					6	8	10	12	16	20				5	6	8	10	12		25.8	86~896	146~896	4.04
	30	100~1150	170~1150								10	12	13	15	16	20	25					8	10	12	16	20	24				6	8	10	12	16	30.8	96~1146	166~1146	5.85

[ ! ]For BSBMS and BSBSS, only * marked sizes are available, and the Max. L and Y dimensions are in ( ).
[ ! ]For BSBN and BSB2N, only No. 6, 8 and 10 are available.

■Round Flange Nuts, Compact Flange Nuts

No.	D (h6)	L	Df	H	P.C.D.	d₁	d₂	h	W	d	B	Basic Rated Torque		Basic Load Rating		Allowable Static Moment		Mass (kg)
No.	D (h6)	L	Df	H	P.C.D.	d₁	d₂	h	W	d	B	Dynamic C_t (N • m)	Static C_0t (N • m)	Dynamic C (kN)	Static C₀ (kN)	M₀₁ (N • m)	M₀₂ (N • m)	Mass (kg)
6	14	25	30	6	22	3.5	6	3.1	6.5	1.5	18	3.8	7	1.2	2.1	5	36	0.03
8	16	25	32	6	24	3.5	6	3.1	6.5		21	4.8	8.7	1.2	2.1	5	36	0.04
10	21	40(33)	42(41)	6(8)	32(30)	4.5	8	4.4(5.3)	14(8.5)		25	19(11)	34(21)	3.8(2.4)	6.9(4.3)	26(15)	181(102)	0.09
13	24	44(36)	44(45)	7(8)	33(34)			4.4(5.3)	15(10)		-	28(20)	52(37)	4.6(3.3)	8.3(5.9)	36(22)	251(148)	0.11
16	31	50	51	7	40			4.4	18			51	93	6.2	11.1	56	386	0.2
20	35	63	58	9	45	5.5	9.5	5.4	22.5	2		85	154	8.5	15.3	83	611	0.3
25	42	71	65	9	52	5.5	9.5	5.4	26.5	2		193	348	15.4	27.7	173	1248	0.4
30	47	80	75	10	60	6.6	11	6.5	30	2.5		272	490	18.5	33.3	212	1581	0.57

[ ! ]Dimensions in ( ) are for SUS440C Equivalent. [ ! ]Allowable static moment M₀₁ is a value measured when a single nut is used, and M₀₂ is a value measured when two nuts are used.

■Straight Nuts

No.	D (h6)	L	b		t (+0.05( 0	d	α	Basic Rated Torque		Basic Load Rating		Allowable Static Moment		Mass (kg)	Dimensions of Key (Included)
				Tolerance				Dynamic C_t (N • m)	Static C_0t (N • m)	Dynamic C (kN)	Static C₀ (kN)	M₀₁ (N • m)	M₀₂ (N • m)		B		h		L₁	R
																Tolerance		Tolerance
6	14	25	2.5	+0.014 0	1.2	1.5	15°	3.8	7	1.2	2.1	5	36	0.012	2.5	+0.016 +0.006	2.5	0 -0.025	10.5	1.25
8	16						25°	4.8	8.7	1.2	2.1	5	36	0.013					10.5
10	21	40(33)	3		1.5		-	19(11)	34(21)	3.8(2.4)	6.9(4.3)	26(15)	181(102)	0.06	3		3		17(14)	1.5
13	24	44(36)						28(20)	52(37)	4.6(3.3)	8.3(5.9)	36(22)	251(148)	0.07					17(14)
16	31	50	3.5	+0.018 0	2			51	93	6.2	11.1	56	386	0.15	3.5	+0.024 +0.012	3.5	0 -0.030	18	1.75
20	35	63	4		2.5	2		85	154	8.5	15.3	83	611	0.2	4		4		29	2
25	42	71						193	348	15.4	27.7	173	1248	0.29					33
30	47	80				2.5		272	490	18.5	33.3	212	1581	0.37					42

[ ! ]Dimensions in ( ) are for SUS440C Equivalent. [ ! ]Allowable static moment M₀₁ is a value measured when a single nut is used, and M₀₂ is a value measured when two nuts are used.

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
BSB2M8-[60-400/1]-F[4-30/1]-B[2-30/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSB2M8G-[60-400/1]-F[4-30/1]-B[2-30/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSB2M8L-[60-400/1]-F[4-30/1]-B[2-30/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSB2M10-[90-600/1]-F[4-40/1]-B[2-40/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSB2M10G-[90-600/1]-F[4-40/1]-B[2-40/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSB2M10L-[90-600/1]-F[4-40/1]-B[2-40/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSB2M13-[100-600/1]-F[4-50/1]-B[2-50/1]-P[5,6,8,10]-M[5,6,8,10]-N[4,5,6]
BSB2M13G-[100-600/1]-F[4-50/1]-B[2-50/1]-P[5,6,8,10]-M[5,6,8,10]-N[4,5,6]
BSB2M13L-[100-600/1]-F[4-50/1]-B[2-50/1]-P[5,6,8,10]-M[5,6,8,10]-N[4,5,6]
BSB2M16-[110-600/1]-F[4-65/1]-B[2-60/1]-P[5,6,8,10,12,13]-M[6,8,10,12]-N[4,5,6,8]
BSB2M16G-[110-600/1]-F[4-65/1]-B[2-60/1]-P[5,6,8,10,12,13]-M[6,8,10,12]-N[4,5,6,8]
BSB2M16L-[110-600/1]-F[4-65/1]-B[2-60/1]-P[5,6,8,10,12,13]-M[6,8,10,12]-N[4,5,6,8]
BSB2M20-[130-700/1]-F[4-80/1]-B[2-90/1]-P[8,10,12,13,15,16]-M[6,8,10,12,16]-N[4,5,6,8,10]
BSB2M20G-[130-700/1]-F[4-80/1]-B[2-90/1]-P[8,10,12,13,15,16]-M[6,8,10,12,16]-N[4,5,6,8,10]
BSB2M20L-[130-700/1]-F[4-80/1]-B[2-90/1]-P[8,10,12,13,15,16]-M[6,8,10,12,16]-N[4,5,6,8,10]
BSB2M25-[150-900/1]-F[4-100/1]-B[2-100/1]-P[8,10,12,13,15,16,20]-M[6,8,10,12,16,20]-N[5,6,8,10,12]
BSB2M25G-[170-1150/1]-F[4-100/1]-B[2-100/1]-P[8,10,12,13,15,16,20]-M[6,8,10,12,16,20]-N[5,6,8,10,12]
BSB2M25L-[170-1150/1]-F[4-100/1]-B[2-100/1]-P[8,10,12,13,15,16,20]-M[6,8,10,12,16,20]-N[5,6,8,10,12]
BSB2M30-[170-1150/1]-F[4-120/1]-B[2-120/1]-P[10,12,13,15,16,20,25]-M[8,10,12,16,20,24]-N[6,8,10,12,16]
BSB2M30G-[170-1150/1]-F[4-120/1]-B[2-120/1]-P[10,12,13,15,16,20,25]-M[8,10,12,16,20,24]-N[6,8,10,12,16]
BSB2M30L-[170-1150/1]-F[4-120/1]-B[2-120/1]-P[10,12,13,15,16,20,25]-M[8,10,12,16,20,24]-N[6,8,10,12,16]
BSB2N8-[60-400/1]-F[4-30/1]-B[2-30/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSB2N8G-[60-400/1]-F[4-30/1]-B[2-30/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSB2N8L-[60-400/1]-F[4-30/1]-B[2-30/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSB2N10-[90-600/1]-F[4-40/1]-B[2-40/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSB2N10G-[90-600/1]-F[4-40/1]-B[2-40/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSB2N10L-[90-600/1]-F[4-40/1]-B[2-40/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSB2S8-[60-400/1]-F[4-30/1]-B[2-30/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSB2S8G-[60-400/1]-F[4-30/1]-B[2-30/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSB2S8L-[60-400/1]-F[4-30/1]-B[2-30/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSB2S10-[90-600/1]-F[4-40/1]-B[2-40/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSB2S10G-[90-600/1]-F[4-40/1]-B[2-40/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSB2S10L-[90-600/1]-F[4-40/1]-B[2-40/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSB2S13-[100-600/1]-F[4-50/1]-B[2-50/1]-P[5,6,8,10]-M[5,6,8,10]-N[4,5,6]
BSB2S13G-[100-600/1]-F[4-50/1]-B[2-50/1]-P[5,6,8,10]-M[5,6,8,10]-N[4,5,6]
BSB2S13L-[100-600/1]-F[4-50/1]-B[2-50/1]-P[5,6,8,10]-M[5,6,8,10]-N[4,5,6]
BSB2S16-[110-600/1]-F[4-65/1]-B[2-60/1]-P[5,6,8,10,12,13]-M[6,8,10,12]-N[4,5,6,8]
BSB2S16G-[110-600/1]-F[4-65/1]-B[2-60/1]-P[5,6,8,10,12,13]-M[6,8,10,12]-N[4,5,6,8]
BSB2S16L-[110-600/1]-F[4-65/1]-B[2-60/1]-P[5,6,8,10,12,13]-M[6,8,10,12]-N[4,5,6,8]
BSB2S20-[130-700/1]-F[4-80/1]-B[2-90/1]-P[8,10,12,13,15,16]-M[6,8,10,12,16]-N[4,5,6,8,10]
BSB2S20G-[130-700/1]-F[4-80/1]-B[2-90/1]-P[8,10,12,13,15,16]-M[6,8,10,12,16]-N[4,5,6,8,10]
BSB2S20L-[130-700/1]-F[4-80/1]-B[2-90/1]-P[8,10,12,13,15,16]-M[6,8,10,12,16]-N[4,5,6,8,10]
BSB2S25-[150-900/1]-F[4-100/1]-B[2-100/1]-P[8,10,12,13,15,16,20]-M[6,8,10,12,16,20]-N[5,6,8,10,12]
BSB2S25G-[150-900/1]-F[4-100/1]-B[2-100/1]-P[8,10,12,13,15,16,20]-M[6,8,10,12,16,20]-N[5,6,8,10,12]
BSB2S25L-[150-900/1]-F[4-100/1]-B[2-100/1]-P[8,10,12,13,15,16,20]-M[6,8,10,12,16,20]-N[5,6,8,10,12]
BSB2S30-[170-1150/1]-F[4-120/1]-B[2-120/1]-P[10,12,13,15,16,20,25]-M[8,10,12,16,20,24]-N[6,8,10,12,16]
BSB2S30G-[170-1150/1]-F[4-120/1]-B[2-120/1]-P[10,12,13,15,16,20,25]-M[8,10,12,16,20,24]-N[6,8,10,12,16]
BSB2S30L-[170-1150/1]-F[4-120/1]-B[2-120/1]-P[10,12,13,15,16,20,25]-M[8,10,12,16,20,24]-N[6,8,10,12,16]
BSBM6-[60-400/1]-F[4-25/1]-B[2-25/1]-P[3,4,5]-M[3,4,5]-N3
BSBM6G-[60-400/1]-F[4-25/1]-B[2-25/1]-P[3,4,5]-M[3,4,5]-N3
BSBM6L-[60-400/1]-F[4-25/1]-B[2-25/1]-P[3,4,5]-M[3,4,5]-N3
BSBM8-[60-400/1]-F[4-30/1]-B[2-30/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSBM8G-[60-400/1]-F[4-30/1]-B[2-30/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSBM8L-[60-400/1]-F[4-30/1]-B[2-30/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSBM10-[60-600/1]-F[4-40/1]-B[2-40/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSBM10G-[60-600/1]-F[4-40/1]-B[2-40/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSBM10L-[60-600/1]-F[4-40/1]-B[2-40/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSBM13-[60-600/1]-F[4-50/1]-B[2-50/1]-P[5,6,8,10]-M[5,6,8,10]-N[4,5,6]
BSBM13G-[60-600/1]-F[4-50/1]-B[2-50/1]-P[5,6,8,10]-M[5,6,8,10]-N[4,5,6]
BSBM13L-[60-600/1]-F[4-50/1]-B[2-50/1]-P[5,6,8,10]-M[5,6,8,10]-N[4,5,6]
BSBM16-[70-600/1]-F[4-65/1]-B[2-60/1]-P[5,6,8,10,12,13]-M[6,8,10,12]-N[4,5,6,8]
BSBM16G-[70-600/1]-F[4-65/1]-B[2-60/1]-P[5,6,8,10,12,13]-M[6,8,10,12]-N[4,5,6,8]
BSBM16L-[70-600/1]-F[4-65/1]-B[2-60/1]-P[5,6,8,10,12,13]-M[6,8,10,12]-N[4,5,6,8]
BSBM20-[80-700/1]-F[4-80/1]-B[2-90/1]-P[8,10,12,13,15,16]-M[6,8,10,12,16]-N[4,5,6,8,10]
BSBM20G-[80-700/1]-F[4-80/1]-B[2-90/1]-P[8,10,12,13,15,16]-M[6,8,10,12,16]-N[4,5,6,8,10]
BSBM20L-[80-700/1]-F[4-80/1]-B[2-90/1]-P[8,10,12,13,15,16]-M[6,8,10,12,16]-N[4,5,6,8,10]
BSBM25-[90-900/1]-F[4-100/1]-B[2-100/1]-P[8,10,12,13,15,16,20]-M[6,8,10,12,16,20]-N[5,6,8,10,12]
BSBM25G-[90-900/1]-F[4-100/1]-B[2-100/1]-P[8,10,12,13,15,16,20]-M[6,8,10,12,16,20]-N[5,6,8,10,12]
BSBM25L-[90-900/1]-F[4-100/1]-B[2-100/1]-P[8,10,12,13,15,16,20]-M[6,8,10,12,16,20]-N[5,6,8,10,12]
BSBM30-[100-1150/1]-F[4-120/1]-B[2-120/1]-P[10,12,13,15,16,20,25]-M[8,10,12,16,20,24]-N[6,8,10,12,16]
BSBM30G-[100-1150/1]-F[4-120/1]-B[2-120/1]-P[10,12,13,15,16,20,25]-M[8,10,12,16,20,24]-N[6,8,10,12,16]
BSBM30L-[100-1150/1]-F[4-120/1]-B[2-120/1]-P[10,12,13,15,16,20,25]-M[8,10,12,16,20,24]-N[6,8,10,12,16]
BSBMS6-[60-190/1]-F[4-25/1]-B[3-15/1]-P[3,4,5]-M[3,4,5]-N3
BSBMS6G-[60-190/1]-F[4-25/1]-B[3-15/1]-P[3,4,5]-M[3,4,5]-N3
BSBMS6L-[60-190/1]-F[4-25/1]-B[3-15/1]-P[3,4,5]-M[3,4,5]-N3
BSBMS8-[60-190/1]-F[4-30/1]-B[4-18/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSBMS8G-[60-190/1]-F[4-30/1]-B[4-18/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSBMS8L-[60-190/1]-F[4-30/1]-B[4-18/1]-P[4,5,6]-M[4,5,6]-N[3,4]
BSBMS10-[60-390/1]-F[4-40/1]-B[4-24/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSBMS10G-[60-390/1]-F[4-40/1]-B[4-24/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSBMS10L-[60-390/1]-F[4-40/1]-B[4-24/1]-P[4,5,6,8]-M[4,5,6,8]-N[3,4,5]
BSBMS13-[60-390/1]-F[4-50/1]-B[5-30/1]-P[5,6,8,10]-M[5,6,8,10]-N[4,5,6]
BSBMS13G-[60-390/1]-F[4-50/1]-B[5-30/1]-P[5,6,8,10]-M[5,6,8,10]-N[4,5,6]
BSBMS13L-[60-390/1]-F[4-50/1]-B[5-30/1]-P[5,6,8,10]-M[5,6,8,10]-N[4,5,6]
BSBMS16-[70-390/1]-F[4-65/1]-B[5-39/1]-P[5,6,8,10,12,13]-M[6,8,10,12]-N[4,5,6,8]
BSBMS16G-[70-390/1]-F[4-65/1]-B[5-39/1]-P[5,6,8,10,12,13]-M[6,8,10,12]-N[4,5,6,8]
BSBMS16L-[70-390/1]-F[4-65/1]-B[5-39/1]-P[5,6,8,10,12,13]-M[6,8,10,12]-N[4,5,6,8]
BSBN6-[60-400/1]-F[4-25/1]-B[2-25/1]-P[3,4,5]-M[3,4,5]-N3
BSBN6G-[60-400/1]-F[4-25/1]-B[2-25/1]-P[3,4,5]-M[3,4,5]-N3
BSBN6L-[60-400/1]-F[4-25/1]-B[2-25/1]-P[3,4,5]-M[3,4,5]-N3

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Nut Type	Shaft Outer Dia. D (Ø)	Nut Overall Length (mm)	Nut O.D. (Ø)	Shaft material	Shaft Overall Length L (mm)	Basic Load Rating: Dynamic Load (N)	Allowable Torque (N•m)	Nut Material	Grease	B (mm)	F (mm)	M (mm)	N (mm)	P (mm)
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	8	25	16	SUJ2 Equivalent	60 ～ 400	1200	4.8	SCM415 Equivalent	Standard (S2)	2 ～ 30	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	8	25	16	SUJ2 Equivalent	60 ～ 400	1200	4.8	SCM415 Equivalent	LG2	2 ～ 30	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	8	25	16	SUJ2 Equivalent	60 ～ 400	1200	4.8	SCM415 Equivalent	ET-100K	2 ～ 30	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	10.4	40	21	SUJ2 Equivalent	90 ～ 600	3800	19	SCM415 Equivalent	Standard (S2)	2 ～ 40	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	10.4	40	21	SUJ2 Equivalent	90 ～ 600	3800	19	SCM415 Equivalent	LG2	2 ～ 40	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	10.4	33	21	SUJ2 Equivalent	90 ～ 600	3800	19	SCM415 Equivalent	ET-100K	2 ～ 40	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	13.4	44	24	SUJ2 Equivalent	100 ～ 600	4600	28	SCM415 Equivalent	Standard (S2)	2 ～ 50	4 ～ 50	5 ～ 10	4 ～ 6	5 ～ 10
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	13.4	44	24	SUJ2 Equivalent	100 ～ 600	4600	28	SCM415 Equivalent	LG2	2 ～ 50	4 ～ 50	5 ～ 10	4 ～ 6	5 ～ 10
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	13.4	36	24	SUJ2 Equivalent	100 ～ 600	4600	28	SCM415 Equivalent	ET-100K	2 ～ 50	4 ～ 50	5 ～ 10	4 ～ 6	5 ～ 10
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	16.6	50	31	SUJ2 Equivalent	110 ～ 600	6200	51	SCM415 Equivalent	Standard (S2)	2 ～ 60	4 ～ 65	6 ～ 12	4 ～ 8	5 ～ 13
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	16.6	50	31	SUJ2 Equivalent	110 ～ 600	6200	51	SCM415 Equivalent	LG2	2 ～ 60	4 ～ 65	6 ～ 12	4 ～ 8	5 ～ 13
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	16.6	50	31	SUJ2 Equivalent	110 ～ 600	6200	51	SCM415 Equivalent	ET-100K	2 ～ 60	4 ～ 65	6 ～ 12	4 ～ 8	5 ～ 13
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	20.6	63	35	SUJ2 Equivalent	130 ～ 700	8500	85	SCM415 Equivalent	Standard (S2)	2 ～ 90	4 ～ 80	6 ～ 16	4 ～ 10	8 ～ 16
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	20.6	63	35	SUJ2 Equivalent	130 ～ 700	8500	85	SCM415 Equivalent	LG2	2 ～ 90	4 ～ 80	6 ～ 16	4 ～ 10	8 ～ 16
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	20.6	63	35	SUJ2 Equivalent	130 ～ 700	8500	85	SCM415 Equivalent	ET-100K	2 ～ 90	4 ～ 80	6 ～ 16	4 ～ 10	8 ～ 16
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	25.8	71	42	SUJ2 Equivalent	150 ～ 900	15400	193	SCM415 Equivalent	Standard (S2)	2 ～ 100	4 ～ 100	6 ～ 20	5 ～ 12	8 ～ 20
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	25.8	71	42	SUJ2 Equivalent	170 ～ 1150	15400	193	SCM415 Equivalent	LG2	2 ～ 100	4 ～ 100	6 ～ 20	5 ～ 12	8 ～ 20
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	25.8	71	42	SUJ2 Equivalent	170 ～ 1150	15400	193	SCM415 Equivalent	ET-100K	2 ～ 100	4 ～ 100	6 ～ 20	5 ～ 12	8 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	30.8	80	47	SUJ2 Equivalent	170 ～ 1150	18500	272	SCM415 Equivalent	Standard (S2)	2 ～ 120	4 ～ 120	8 ～ 24	6 ～ 16	10 ～ 25
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	30.8	80	47	SUJ2 Equivalent	170 ～ 1150	18500	272	SCM415 Equivalent	LG2	2 ～ 120	4 ～ 120	8 ～ 24	6 ～ 16	10 ～ 25
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	30.8	80	47	SUJ2 Equivalent	170 ～ 1150	18500	272	SCM415 Equivalent	ET-100K	2 ～ 120	4 ～ 120	8 ～ 24	6 ～ 16	10 ～ 25
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Compact Flange	8	25	16	SUJ2 Equivalent	60 ～ 400	1200	4.8	SCM415 Equivalent	Standard (S2)	2 ～ 30	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Compact Flange	8	25	16	SUJ2 Equivalent	60 ～ 400	1200	4.8	SCM415 Equivalent	LG2	2 ～ 30	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Compact Flange	8	25	16	SUJ2 Equivalent	60 ～ 400	1200	4.8	SCM415 Equivalent	ET-100K	2 ～ 30	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Compact Flange	10.4	40	21	SUJ2 Equivalent	90 ～ 600	3800	19	SCM415 Equivalent	Standard (S2)	2 ～ 40	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Compact Flange	10.4	40	21	SUJ2 Equivalent	90 ～ 600	3800	19	SCM415 Equivalent	LG2	2 ～ 40	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Compact Flange	10.4	40	21	SUJ2 Equivalent	90 ～ 600	3800	19	SCM415 Equivalent	ET-100K	2 ～ 40	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	9 Day(s) or more	10	Straight	8	25	16	SUJ2 Equivalent	60 ～ 400	1200	4.8	SCM415 Equivalent	Standard (S2)	2 ～ 30	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	11 Day(s) or more	10	Straight	8	25	16	SUJ2 Equivalent	60 ～ 400	1200	4.8	SCM415 Equivalent	LG2	2 ～ 30	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	11 Day(s) or more	10	Straight	8	25	16	SUJ2 Equivalent	60 ～ 400	1200	4.8	SCM415 Equivalent	ET-100K	2 ～ 30	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	9 Day(s) or more	10	Straight	10.4	40	21	SUJ2 Equivalent	90 ～ 600	3800	19	SCM415 Equivalent	Standard (S2)	2 ～ 40	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	11 Day(s) or more	10	Straight	10.4	40	21	SUJ2 Equivalent	90 ～ 600	3800	19	SCM415 Equivalent	LG2	2 ～ 40	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	11 Day(s) or more	10	Straight	10.4	33	21	SUJ2 Equivalent	90 ～ 600	3800	19	SCM415 Equivalent	ET-100K	2 ～ 40	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	9 Day(s) or more	10	Straight	13.4	44	24	SUJ2 Equivalent	100 ～ 600	4600	28	SCM415 Equivalent	Standard (S2)	2 ～ 50	4 ～ 50	5 ～ 10	4 ～ 6	5 ～ 10
-	1 Piece(s)	11 Day(s) or more	10	Straight	13.4	44	24	SUJ2 Equivalent	100 ～ 600	4600	28	SCM415 Equivalent	LG2	2 ～ 50	4 ～ 50	5 ～ 10	4 ～ 6	5 ～ 10
-	1 Piece(s)	11 Day(s) or more	10	Straight	13.4	36	24	SUJ2 Equivalent	100 ～ 600	4600	28	SCM415 Equivalent	ET-100K	2 ～ 50	4 ～ 50	5 ～ 10	4 ～ 6	5 ～ 10
-	1 Piece(s)	9 Day(s) or more	10	Straight	16.6	50	31	SUJ2 Equivalent	110 ～ 600	6200	51	SCM415 Equivalent	Standard (S2)	2 ～ 60	4 ～ 65	6 ～ 12	4 ～ 8	5 ～ 13
-	1 Piece(s)	11 Day(s) or more	10	Straight	16.6	50	31	SUJ2 Equivalent	110 ～ 600	6200	51	SCM415 Equivalent	LG2	2 ～ 60	4 ～ 65	6 ～ 12	4 ～ 8	5 ～ 13
-	1 Piece(s)	11 Day(s) or more	10	Straight	16.6	50	31	SUJ2 Equivalent	110 ～ 600	6200	51	SCM415 Equivalent	ET-100K	2 ～ 60	4 ～ 65	6 ～ 12	4 ～ 8	5 ～ 13
-	1 Piece(s)	9 Day(s) or more	10	Straight	20.6	63	35	SUJ2 Equivalent	130 ～ 700	8500	85	SCM415 Equivalent	Standard (S2)	2 ～ 90	4 ～ 80	6 ～ 16	4 ～ 10	8 ～ 16
-	1 Piece(s)	11 Day(s) or more	10	Straight	20.6	63	35	SUJ2 Equivalent	130 ～ 700	8500	85	SCM415 Equivalent	LG2	2 ～ 90	4 ～ 80	6 ～ 16	4 ～ 10	8 ～ 16
-	1 Piece(s)	11 Day(s) or more	10	Straight	20.6	63	35	SUJ2 Equivalent	130 ～ 700	8500	85	SCM415 Equivalent	ET-100K	2 ～ 90	4 ～ 80	6 ～ 16	4 ～ 10	8 ～ 16
-	1 Piece(s)	9 Day(s) or more	10	Straight	25.8	71	42	SUJ2 Equivalent	150 ～ 900	15400	193	SCM415 Equivalent	Standard (S2)	2 ～ 100	4 ～ 100	6 ～ 20	5 ～ 12	8 ～ 20
-	1 Piece(s)	11 Day(s) or more	10	Straight	25.8	71	42	SUJ2 Equivalent	150 ～ 900	15400	193	SCM415 Equivalent	LG2	2 ～ 100	4 ～ 100	6 ～ 20	5 ～ 12	8 ～ 20
-	1 Piece(s)	11 Day(s) or more	10	Straight	25.8	71	42	SUJ2 Equivalent	150 ～ 900	15400	193	SCM415 Equivalent	ET-100K	2 ～ 100	4 ～ 100	6 ～ 20	5 ～ 12	8 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Straight	30.8	80	47	SUJ2 Equivalent	170 ～ 1150	18500	272	SCM415 Equivalent	Standard (S2)	2 ～ 120	4 ～ 120	8 ～ 24	6 ～ 16	10 ～ 25
-	1 Piece(s)	11 Day(s) or more	10	Straight	30.8	80	47	SUJ2 Equivalent	170 ～ 1150	18500	272	SCM415 Equivalent	LG2	2 ～ 120	4 ～ 120	8 ～ 24	6 ～ 16	10 ～ 25
-	1 Piece(s)	11 Day(s) or more	10	Straight	30.8	80	47	SUJ2 Equivalent	170 ～ 1150	18500	272	SCM415 Equivalent	ET-100K	2 ～ 120	4 ～ 120	8 ～ 24	6 ～ 16	10 ～ 25
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	6	25	14	SUJ2 Equivalent	60 ～ 400	1200	3.8	SCM415 Equivalent	Standard (S2)	2 ～ 25	4 ～ 25	3 ～ 5	3	3 ～ 5
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	6	25	14	SUJ2 Equivalent	60 ～ 400	1200	3.8	SCM415 Equivalent	LG2	2 ～ 25	4 ～ 25	3 ～ 5	3	3 ～ 5
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	6	25	14	SUJ2 Equivalent	60 ～ 400	1200	3.8	SCM415 Equivalent	ET-100K	2 ～ 25	4 ～ 25	3 ～ 5	3	3 ～ 5
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	8	25	16	SUJ2 Equivalent	60 ～ 400	1200	4.8	SCM415 Equivalent	Standard (S2)	2 ～ 30	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	8	25	16	SUJ2 Equivalent	60 ～ 400	1200	4.8	SCM415 Equivalent	LG2	2 ～ 30	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	8	25	16	SUJ2 Equivalent	60 ～ 400	1200	4.8	SCM415 Equivalent	ET-100K	2 ～ 30	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	10.4	40	21	SUJ2 Equivalent	60 ～ 600	3800	19	SCM415 Equivalent	Standard (S2)	2 ～ 40	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	10.4	40	21	SUJ2 Equivalent	60 ～ 600	3800	19	SCM415 Equivalent	LG2	2 ～ 40	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	10.4	33	21	SUJ2 Equivalent	60 ～ 600	3800	19	SCM415 Equivalent	ET-100K	2 ～ 40	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	13.4	44	24	SUJ2 Equivalent	60 ～ 600	4600	28	SCM415 Equivalent	Standard (S2)	2 ～ 50	4 ～ 50	5 ～ 10	4 ～ 6	5 ～ 10
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	13.4	44	24	SUJ2 Equivalent	60 ～ 600	4600	28	SCM415 Equivalent	LG2	2 ～ 50	4 ～ 50	5 ～ 10	4 ～ 6	5 ～ 10
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	13.4	36	24	SUJ2 Equivalent	60 ～ 600	4600	28	SCM415 Equivalent	ET-100K	2 ～ 50	4 ～ 50	5 ～ 10	4 ～ 6	5 ～ 10
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	16.6	50	31	SUJ2 Equivalent	70 ～ 600	6200	51	SCM415 Equivalent	Standard (S2)	2 ～ 60	4 ～ 65	6 ～ 12	4 ～ 8	5 ～ 13
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	16.6	50	31	SUJ2 Equivalent	70 ～ 600	6200	51	SCM415 Equivalent	LG2	2 ～ 60	4 ～ 65	6 ～ 12	4 ～ 8	5 ～ 13
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	16.6	50	31	SUJ2 Equivalent	70 ～ 600	6200	51	SCM415 Equivalent	ET-100K	2 ～ 60	4 ～ 65	6 ～ 12	4 ～ 8	5 ～ 13
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	20.6	63	35	SUJ2 Equivalent	80 ～ 700	8500	85	SCM415 Equivalent	Standard (S2)	2 ～ 90	4 ～ 80	6 ～ 16	4 ～ 10	8 ～ 16
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	20.6	63	35	SUJ2 Equivalent	80 ～ 700	8500	85	SCM415 Equivalent	LG2	2 ～ 90	4 ～ 80	6 ～ 16	4 ～ 10	8 ～ 16
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	20.6	63	35	SUJ2 Equivalent	80 ～ 700	8500	85	SCM415 Equivalent	ET-100K	2 ～ 90	4 ～ 80	6 ～ 16	4 ～ 10	8 ～ 16
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	25.8	71	42	SUJ2 Equivalent	90 ～ 900	15400	193	SCM415 Equivalent	Standard (S2)	2 ～ 100	4 ～ 100	6 ～ 20	5 ～ 12	8 ～ 20
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	25.8	71	42	SUJ2 Equivalent	90 ～ 900	15400	193	SCM415 Equivalent	LG2	2 ～ 100	4 ～ 100	6 ～ 20	5 ～ 12	8 ～ 20
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	25.8	71	42	SUJ2 Equivalent	90 ～ 900	15400	193	SCM415 Equivalent	ET-100K	2 ～ 100	4 ～ 100	6 ～ 20	5 ～ 12	8 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Round Flange	30.8	80	47	SUJ2 Equivalent	100 ～ 1150	18500	272	SCM415 Equivalent	Standard (S2)	2 ～ 120	4 ～ 120	8 ～ 24	6 ～ 16	10 ～ 25
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	30.8	80	47	SUJ2 Equivalent	100 ～ 1150	18500	272	SCM415 Equivalent	LG2	2 ～ 120	4 ～ 120	8 ～ 24	6 ～ 16	10 ～ 25
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Round Flange	30.8	80	47	SUJ2 Equivalent	100 ～ 1150	18500	272	SCM415 Equivalent	ET-100K	2 ～ 120	4 ～ 120	8 ～ 24	6 ～ 16	10 ～ 25
-	1 Piece(s)	8 Day(s) or more	10	[Flanged Type] Round Flange	6	25	14	SUS440C Equivalent	60 ～ 190	1200	3.8	SUS440C Equivalent	Standard (S2)	3 ～ 15	4 ～ 25	3 ～ 5	3	3 ～ 5
-	1 Piece(s)	10 Day(s) or more	10	[Flanged Type] Round Flange	6	25	14	SUS440C Equivalent	60 ～ 190	1200	3.8	SUS440C Equivalent	LG2	3 ～ 15	4 ～ 25	3 ～ 5	3	3 ～ 5
-	1 Piece(s)	10 Day(s) or more	10	[Flanged Type] Round Flange	6	25	14	SUS440C Equivalent	60 ～ 190	1200	3.8	SUS440C Equivalent	ET-100K	3 ～ 15	4 ～ 25	3 ～ 5	3	3 ～ 5
-	1 Piece(s)	8 Day(s) or more	10	[Flanged Type] Round Flange	8	25	16	SUS440C Equivalent	60 ～ 190	1200	4.8	SUS440C Equivalent	Standard (S2)	4 ～ 18	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	10 Day(s) or more	10	[Flanged Type] Round Flange	8	25	16	SUS440C Equivalent	60 ～ 190	1200	4.8	SUS440C Equivalent	LG2	4 ～ 18	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	10 Day(s) or more	10	[Flanged Type] Round Flange	8	25	16	SUS440C Equivalent	60 ～ 190	1200	4.8	SUS440C Equivalent	ET-100K	4 ～ 18	4 ～ 30	4 ～ 6	3 ～ 4	4 ～ 6
-	1 Piece(s)	8 Day(s) or more	10	[Flanged Type] Round Flange	10.4	33	21	SUS440C Equivalent	60 ～ 390	2400	11	SUS440C Equivalent	Standard (S2)	4 ～ 24	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	10 Day(s) or more	10	[Flanged Type] Round Flange	10.4	33	21	SUS440C Equivalent	60 ～ 390	2400	11	SUS440C Equivalent	LG2	4 ～ 24	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	10 Day(s) or more	10	[Flanged Type] Round Flange	10.4	33	21	SUS440C Equivalent	60 ～ 390	2400	11	SUS440C Equivalent	ET-100K	4 ～ 24	4 ～ 40	4 ～ 8	3 ～ 5	4 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	[Flanged Type] Round Flange	13.4	36	24	SUS440C Equivalent	60 ～ 390	3300	20	SUS440C Equivalent	Standard (S2)	5 ～ 30	4 ～ 50	5 ～ 10	4 ～ 6	5 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	[Flanged Type] Round Flange	13.4	36	24	SUS440C Equivalent	60 ～ 390	3300	20	SUS440C Equivalent	LG2	5 ～ 30	4 ～ 50	5 ～ 10	4 ～ 6	5 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	[Flanged Type] Round Flange	13.4	36	24	SUS440C Equivalent	60 ～ 390	3300	20	SUS440C Equivalent	ET-100K	5 ～ 30	4 ～ 50	5 ～ 10	4 ～ 6	5 ～ 10
-	1 Piece(s)	8 Day(s) or more	10	[Flanged Type] Round Flange	16.6	50	31	SUS440C Equivalent	70 ～ 390	6200	51	SUS440C Equivalent	Standard (S2)	5 ～ 39	4 ～ 65	6 ～ 12	4 ～ 8	5 ～ 13
-	1 Piece(s)	10 Day(s) or more	10	[Flanged Type] Round Flange	16.6	50	31	SUS440C Equivalent	70 ～ 390	6200	51	SUS440C Equivalent	LG2	5 ～ 39	4 ～ 65	6 ～ 12	4 ～ 8	5 ～ 13
-	1 Piece(s)	10 Day(s) or more	10	[Flanged Type] Round Flange	16.6	50	31	SUS440C Equivalent	70 ～ 390	6200	51	SUS440C Equivalent	ET-100K	5 ～ 39	4 ～ 65	6 ～ 12	4 ～ 8	5 ～ 13
-	1 Piece(s)	9 Day(s) or more	10	[Flanged Type] Compact Flange	6	25	14	SUJ2 Equivalent	60 ～ 400	1200	3.8	SCM415 Equivalent	Standard (S2)	2 ～ 25	4 ～ 25	3 ～ 5	3	3 ～ 5
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Compact Flange	6	25	14	SUJ2 Equivalent	60 ～ 400	1200	3.8	SCM415 Equivalent	LG2	2 ～ 25	4 ～ 25	3 ～ 5	3	3 ～ 5
-	1 Piece(s)	11 Day(s) or more	10	[Flanged Type] Compact Flange	6	25	14	SUJ2 Equivalent	60 ～ 400	1200	3.8	SCM415 Equivalent	ET-100K	2 ～ 25	4 ～ 25	3 ～ 5	3	3 ～ 5

More Information

Product TOP

Basic Information

Type	Solid Shaft	Nut Length	Standard	Preload	Standard
Accuracy Grade	Standard Grade	End Shape (Left)	Stepped and Threaded	End Shape (Right)	Tapped
Torque	Middle Torque	Ball Recirculating Type	Single

Configure

135 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Nut Type
- Straight
- Flanged Type
  - Compact Flange
  - Round Flange
Clear
Shaft Outer Dia. D(Ø)
6

8

10.4

13.4

16.6

20.6

25.8

30.8
Clear
Nut Overall Length(mm)
25

33

36

40

44

50

63

71

80
Clear
Nut O.D.(Ø)
14

16

21

24

31

35

42

47
Clear
Shaft material
- SUS440C Equivalent
- SUJ2 Equivalent
Clear
Shaft Overall Length L(mm)
[60-1150/1mm Unit(s)]
Clear
Nut Material
- SCM415 Equivalent
- SUS440C Equivalent
Clear
Grease
- ET-100K
- LG2
- Standard (S2)
Clear
B(mm)
[2-120/1mm Unit(s)]
Clear
F(mm)
[4-120/1mm Unit(s)]
Clear
M(mm)
3

4

5

6

8

10

12

16

20

24
Clear
N(mm)
3

4

5

6

8

10

12

16
Clear
P(mm)
3

4

5

6

8

10

12

13

15

16

20

25
Clear
type
- BSB2M
- BSB2N
- BSB2S
- BSBM
- BSBMS
- BSBN
- BSBS
- BSBSS
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

8 Day(s) or Less

9 Day(s) or Less

10 Day(s) or Less

11 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(65) 6733 7211 / FAX：(65) 6733 0211; 9:00am - 6:00pm (Monday - Friday); Technical Inquiry

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

Ball Splines - One End Stepped and Threaded, One End Tapped (Part Numbers)

(i)Caution

Specifications

Alterations

Part Number

More Information

Basic Information

Configure

Specification/Dimensions

Nut Type

Shaft Outer Dia. D(Ø)

Nut Overall Length(mm)

Nut O.D.(Ø)

Shaft material

Shaft Overall Length L(mm)

Nut Material

Grease

B(mm)

F(mm)

M(mm)

N(mm)

P(mm)

type

CAD

Days to Ship

Specify Alterations

Tech Support

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)